• IKEA has launched a new wireless driver for its integrated LED lights
• Called Dubbelkisel, it connects your lights to IKEA's Bilresa hub
• It's Matter-enabled so you can integrate it into a wider smart home setup

If you have IKEA integrated lights in your cabinets or wardrobe, there's good news — the company has just launched a new driver that lets you control them wirelessly, with Matter compatibility, so you can integrate them into the rest of your smart home.

The new driver, called Dubbelkisel, is a successor to the Trådfri driver, which allowed you to control your integrated lights via a small remote control using the Zigbee protocol. The new driver is different; instead of linking directly to a remote, it connects to IKEA's Dirigera hub, which means you can operate your cabinet lights with any of IKEA's smart switches — or even non-IKEA devices as part of wider Matter setup.

As Notebookcheck reports, news of the Dubbelkisel leaked earlier this year, when the driver appeared in a database of Thread devices, but this is the first time we've seen it on sale.

Some users on Reddit managed to get their hands on the device early, and report that it generally performs well, though the older Trådfri has some advantages.

"No problems so far," wrote one poster on r/tradfri. "It’s paired via a gateway, so there’s a noticeable delay when turning on the light. The previous Trådfri power supply was connected directly to the remote and worked instantly. Also I preferred the old, small Trådfri remote over the current Bilresa model."

The new driver is currently available in a selection of European countries, and is expected to roll out more widely within the coming weeks. It's priced at €18, which is approximately $20 / £15 / AU$30.

Can AI-driven NAS tech be sentimental? UGreen CEO Samuel Zhang seems to think so.

Launching the company’s new smart-home technology suite, he started by recounting a personal story. It was a hot summer’s day, and his family gathered in the backyard for a barbecue. They cooked together, chatted, played, and just had a genuinely fantastic time. But weeks later, when Zhang went to check his photo gallery and relive that cherished day, he was left feeling disappointed. The family hadn't taken any photos.

This, he said, got him thinking about home cameras — devices that are typically used for security. But, Zhang said, “it [a home camera] should see more than just danger — it should also be able to witness the joys of everyday family life”. And this, he said, was one of the key points of inspiration for UGreen’s new suite of local smart-home AI technology.

I got the chance to hear about, and see, UGreen’s home hubs, cameras, digital photo frames and more at IFA 2026 in Berlin. Here’s what I learned — and how the technology could transform the smart home.

Keeping it local

At the heart of UGreen’s smart-home suite is the new HomeAgent. This is an ‘agentic AI local hub' that brings local storage, computing, and control all together in a single device. Through this hub, users can connect up a range of UGreen AIoT devices, such as cameras, smart speakers, and digital photo frames, plus some select third-party products.

A crucial part of the HomeAgent’s appeal is its reliance on local storage and computing. This means that any data that runs through your hub — be that photos, videos, voice inputs, or other files — is processed locally, rather than through a corporate cloud server.

At a time when trust in large corporations is strikingly low, and major data breaches seem all too common, this could be a massive selling point for security-savvy customers. Keeping data local also removes the need for costly Cloud subscriptions, making the initial investment feel that bit more worthwhile.

There are three HomeAgent models scheduled for release. The first is the UGreen HomeAgent HA100, which is the most basic option. It provides all of the core functions you’d need from the hub, but offers slightly less processing power, memory, and storage, among other things, than its siblings. The HA100 Pro is the step-up model, which offers heightened performance, with 205 TOPS (as opposed to the standard HA100’s 26 TOPS), a 10GbE LAN port (compared to the HA100’s 2.5GbE), and a more advanced CPU.

The final boss, if you will, of the HomeAgent trio is the MA100. This is powered by the NVIDIA Jetson Thor T5000, and offers far superior AI performance to the other two models, and considerably more memory and storage.

However, this is certainly reflected in the price, with the MA100 commanding a list price of $19,999, compared to the HA100 Pro, which costs $5,999 and the HA100 at $1,799. Early bird offers are available, which make the HomeAgents about half-price across the board. Shipping is set to commence in early 2027.

AIoT in action

So what does UGreen’s smart home AIoT tech look like in person? Well, pretty impressive.

I was able to check out a demo, and take a closer look at all of the HomeAgent products, and other devices you can connect up to it. UGreen had a HomeAgent connected to a smart speaker, and a camera, among other things.

I tried walking towards a door, and a UGreen smart security camera started blaring after I walked past a certain point, telling me that I was on private property. This data is processed locally through the HomeAgent, so if you ask your connected smart speaker about any unusual activity, it can tell you if anyone approached your door, whether that was a delivery worker, or something more nefarious.

The smart speaker UGreen showed off has a new AI assistant, named Uliya. You can use the smart speaker to do just about anything around your home. You can ask Uliya to remind you of where you were at a specific time, to close the curtains, to play music, or even to identify the location of your pet and cast a live video feed. The functionality you get will vary depending on how invested you are in UGreen’s AIoT ecosystem, but the capabilities are pretty broad.

You can also ask Uliya to give you a summary of captured events throughout the day, display memories on a UGreen smart photo frame in real time, or to show you highlights from a special day — circling back to Zhang’s desire to revive memories that had been lost in time. One function I really liked was the ability to create an Away mode, so that when you step out of the house, lights will turn off, curtains will close, and a robovac will get to work.

UGreen’s new HomeAgents appear to be incredibly capable, feature-rich, and innovative products, and their local handling of data could be game changing for some households. At the product launch, Zhang said “In the future, we hope every family can have a HomeAgent”; and it'll be interesting to see how families adopt such tech moving forward.

It's been a busy week for the team at Philips Hue. At its annual showcase event in Berlin, the company unveiled not just a new series of smart lights (including some particularly stylish additions to its Liane series), but also a whole new approach to AI, which it's using to take the complexity out of creating bespoke automated lighting setups specifically for your home. No more tinkering with toggles and timers — just tell the app what you want your lights to do and when, and the software will handle the rest.

This isn't Philips Hue's first foray into AI. In 2025, the brand introduced an AI assistant that allowed users to describe a lighting scene and would then either find a match in the library of presets or create a new scene from scratch if nothing suitable existed.

Earlier this year, it also launched SpatialAware for the Philips Hue Bridge Pro, which applies lighting scenes differently depending on the position of smart bulbs, light strips, and lamps in a room, with AI trained using expertise from professional lighting designers.

After this week's showcase, I spoke to Marco Merolla, Executive Vice President and Business Leader of Consumer Connected Lighting at Philips Hue's parent brand Signify, to find out his thoughts on the future of smart lighting and AI. I started by asking him about SpatialAware, and whether users had welcomed the new feature in their homes.

"It’s something that brings smart lighting to the next level, but also intuitiveness in getting to the result that you want as a user — to the desired ambience," Merolla said. "The reception of the base was very good in terms of adoption. This is an exclusive currently with the Bridge Pro, but the reception of the Bridge Pro was extremely good in terms of adoption, and that’s not surprising, because, as we said, ambience creation is key in smart lighting."

SpatialAware has been a success, but Merolla says the brand has now turned its focus to the custom AI automations demonstrated in Berlin.

"Really, in our perspective, [that is] the next step, because there is a lot that you could do, or may do today that is a bit limited by the system itself," he said. "By analyzing and assessing the user behavior and the consumer behavior, we create a lot of different layers with which they can create behaviors and automation."

That analysis doesn't mean monitoring the behavior of individual users, or automatically creating anything for you based on that behavior. Instead, Signify uses anonymised, aggregated usage insights and broader consumer research to understand patterns and usage, which help inform the behaviors and automation built into the system.

"Clearly there is a limit right now, but with the power of large language models, that is not there anymore, so we can give them the chance and [get them] into concepts that were completely unprecedented before — and that’s part of the things that we launched yesterday," said Merolla. "We’re super excited because the consumer experience will change dramatically in the way you can enjoy the system and create beautiful things."

Not AI for the sake of it

The Philips Hue showcase was packed with news and launches, so I asked Merolla which ones he was most excited about.

"I was super excited by three of them," he said. "Custom AI behavior is a great step because it’s not AI for the sake of it — it’s really AI at the service of the consumer experience. Not in the sense of wanting to enter into people’s lives or be intrusive, but in the sense of giving them a chance to unlock possibilities in a very intuitive way. Custom AI from this perspective is an amazing, lovely direction.

"The second key one that’s quite close to my heart is the entertainment area," he said. "You know that over the years we have worked a lot on making the lighting experience better and better, stronger and stronger. Here, the effort we made was really to make it more accessible."

Merolla explained that accessibility isn't just about price, although that is something Philips Hue has addressed with the Sync Box 4K — a more affordable alternative to the Philips Hue Play Sync Box 8K that launched in September 2024. Accessibility, he said, is also about compatibility, which is why Philips Hue has launched Screen Sync — an alternative to the Sync Box that uses a camera rather than HDMI input, so you can synchronize your Hue lights with your TV screen regardless of the source.

"In the area of accessibility, there is also the Bridgeless idea," he added, referring to the ability to use the Sync Box 8K, 4K and Screen Sync without buying an additional Philips Hue Bridge Zigbee hub. "You can have just one strip light in a Bridgeless configuration. And this is again because we believe that everyone should watch TV or watch video with at least one light connected to amplify the experience, and we don’t want to limit the user who, in that specific moment, only wants that kind of benefit [without] having to necessarily join the full ecosystem."

The final items on Merolla's list of exciting launches are the new Liane 360-degree rope and Signe pole lights.

"These are beautiful design objects — really beautiful design objects," he said. "We did not invent the archetype in the design world — that archetype is something that already exists, but of course we can create the mix between a beautiful design object and an amazing light structure. These two things very often don’t go together. Sometimes products that have a super cool design light effect, like gradient scenes and so on, are not necessarily associated with the most beautiful design from an object perspective.

"And as a direction for the brand in the future, I firmly believe that we need to put this world together — that the design of the external object and the light effect, the things that you can do with that, really need to merge. And I think Liane and the new Signe product are a strong step in this direction."

It will definitely be interesting to see how those two aspects join together in the future, and whether AI functionality begins to affect the design of Philips Hue lights, now that LLMs can remove the barrier to complex automations. I'm definitely looking forward to next year's showcase.

• The Anthbot R7 Series includes an 'EdgeEase' string trimmer
• Its mounted on an arm and comes with its own camera for safety
• There's also infrared animal detection

Effective edge trimming has long been the bane of a lawnbot-maker's life. After all, what good is a robot mower if you then have to go in with a side-trimmer to clean up all the lawn edges afterwards? Anthbot's newest robo-mower — the R7 Series, on show at IFA 2026 — has an innovative solution.

The brand has tacked a string trimmer onto the side of the lawnbot. Or, more accurately, onto a "robot arm", mounted to the side of the lawnbot. This arm is designed to adjust to follow winding lawn boundaries, ensuring "zero-gap edge cutting without manual touch-ups". Anthbot dubs the system 'EdgeEase'.

I saw it being demoed — albeit on an AstroTurf lawn, without any actual cutting. The arm movement is smooth and functions well, tucking neatly away when not required. (It's a little less visually impressive than Segway Navimow's own mechanical side-trimming system, but which system functions better remains to be seen.)

I've seen side-mounted blade trimmers before, but this string version feels like a slightly safer option to be protruding out into the open... at least when not in use. Of course, when spinning, those strings will be able to slice just as effectively as a blade.

On that point, I'm surprised Anthbot hasn't added any kind of protective casing. There is a camera specifically dedicated to keeping an eye on the trimming arm, but it's still putting a lot of trust in those obstacle-spotting skills.

Hedgehog spotting

The EdgeEase string trimmer is the headline addition, but I was also interested to see Anthbot has included an infrared sensor for animal detection. This is designed to pick up thermal signals from critters like hedgehogs that might be hidden in the grass, so the mower can avoid them.

These are two standout features in what looks like an altogether extremely capable lawnbot. For the main mowing, it uses two floating cutting discs, designed to adjust to uneven ground for a clean finish. There's also all-wheel drive — precisely powered by four drive motors and two independent steering motors. That's designed to help with traction and maneuverability.

The navigation suite includes LiDAR, RTK, and three AI-backed cameras (including that trimmer cam) to provide "robust, all-scenario positioning" that won't drop out if, for example, the satellite signal is blocked. Anthbot emphasizes the R7 Series is "designed to handle the complexity of real gardens rather than idealized, flat lawns".

The ANTHBOT R7 Series comprises two lawnbots: the R730 and R720. The R730 is designed for lawns up to 3,000㎡ and has the string trimmer included as standard. The R720 has a smaller battery and is meant for yards up to 2,000㎡, and the string trimmer is an optional extra.

IFA, Berlin's huge annual tech expo, is where some of the biggest tech firms unveil their latest innovations — and this year is one of the strongest we've seen in a long time for interesting new releases.

IFA is a great place to find fascinating new gadgets and devices, ranging from next-gen AR glasses to self-driving personal mobility vehicles, and from weird new kitchen appliances to armies of humanoid robots.

We've chosen the top products from those that were nominated for our IFA 2026 'Best in Show' awards to produce this list of our 25 winners, based on how innovative they are, how well they serve their intended use, and the degree to which we think they'll influence their area of the tech market.

There were many more products that we really liked, of course, but we had to be ruthless — here are our top picks from IFA 2026.

Anker Soundcore Sleep Earbuds 4 Pro

The best technology delivers real-world benefits, and what could be more beneficial than a good night's sleep? The Soundcore Sleep Earbuds 4 Pro use in-ear PPG optical sensors to monitor your heartrate, which is more accurate than other optical tracking methods thanks to the rich capillaries and stable position of your ear canal. That monitoring delivers data to the smart-screen, phone-free SleepHub charging case.

The Sleep Earbuds Pro feature passive isolation as well as 30dB active noise cancelling, and the case-based snore monitoring system detects and masks the sound of your partner snoring using its built-in sounds. Despite the addition of multiple new components the housing is thinner than previous generations, and even more comfortable for side sleepers.

Anker's BioSync dynamic audio system monitors relaxation in real time, dynamically adjusting the audio content and structure to help you find the most effective sleep sounds. Sleep earbuds are something that can truly improve your health and happiness by improving your sleep, and these look like a really smart upgrade.

Agibot A3

Agibot is doing some amazing things with humanoid robots, and the full-sized Agibot A3 combines multiple capabilities in a lightweight, extremely dynamic model: if you're assembling a robot dance troupe or planning a big exhibition, the A3's the bot to buy.

The A3 weighs just 55kg, has a power-to-weight ratio of 0.218kW/kg, and delivers up to 12kW of instant peak power, enabling it to somersault. Its battery runs for up to 10 hours and is hot-swappable in seconds, so it's great for applications where it needs to last all day. It'll happily fit in an SUV for travel, too.

In addition to voice and app control, the A3 delivers industry-first touch sensing that adds physical interaction to its controls. It also has a 360-degree multi-array mic system for accurate voice recognition, even in noisy environments.

One of the most exciting features of the A3 is its large-scale swarm co-ordination, which uses precise UWB positioning to enable performances by up to 100 individual robots. That makes it possible to create very complex, high-impact performances for big events, as well as enabling multiple units to work smartly in environments such as factories or warehouses. The awareness and the uptime make this a great new approach to robotics.

Hypershell X Ultra S

The Hypershell X Ultra S exoskeleton helped mountaineer Adriana Brownlee in -30C temperatures on Mount Everest, supported athlete Aurélien Fontenoy's 4,037km Route 66 journey while recovering from injury, and is currently being trialed by search and rescue organizations worldwide.

Before Hypershell, exoskeletons cost $100,000 and above; the same capabilities are now available to consumers for less than $2,000, in a device weighing under 2kg.

The X Ultra S is an end-to-end AI motion-control system that uses an AI model to transform raw sensor data directly into motor torque, enabling faster response, smoother adaptation, and more natural human-machine synchronization.

There are 12 active modes, including walking, cycling and running, and a new Gentle Assist mode for older adults and users with short or shuffling strides. Fitness Mode adds resistance, turning a walk into a workout.

But it's the price that won us over here — this could be a game changer for getting people with limited mobility out and doing more things that they love, from hiking to just visiting the local stores.

JMGO IRIS Ultra Max

The IRIS Ultra Max is one of the world’s first true 4K 120Hz flagship smart projectors, delivering native 4K (rather than pixel-shifted) at 120Hz from input to output, all from its very compact case.

The Ultra Max's dual iris system has 6+9 blades, the highest count in its class, which promises to improve stray light suppression by 11.34% for a more accurate picture, while delivering class-leading contrast, with a quoted ration of 10,000:1. The MALC 6.0 Triple-Laser Engine delivers an impressive 6,500 ISO lumens of brightness, making it more visible in more lighting conditions, and with a promised ability to recreate 110% of the BT.2020 color space, with an astounding color accuracy of delta-E of 0.7, meaning it's truly capable of pro-level color range and accuracy.

The IRIS Ultra Max also introduces an industry-first 3-in-1 Optical System that integrates 0.88–1.7:1 Optical Zoom, Four-Way Lens Shift (V ±130%, H ±53%), and an AI-Powered Gimbal (360° H, 150° V) into a unified projection architecture. This makes it more more flexible than traditional projectors to positioning, because it has so many different options for correcting its picture. It gives small home theater setups top-tier performance without compromise.

DJI Osmo Pocket 4P

Designed for vloggers and movie-makers alike, the Osmo Pocket 4P is the world’s first dual-lens pocket gimbal camera. It delivers cinema-grade imaging in a pocket-friendly form, and features DJI's Academy Award-winning Ronin stabilization.

The main lens is a wide-angle 20mm equivalent with an f/2.0 aperture, and a new 1-inch CMOS sensor that offers 17 stops of dynamic range and over one billion colors via DJI's new 10-bit D-Log 2 color profile.

That's supplemented with a 60mm medium-tele portrait lens, which gives you 3x optical zoom and up to 12x digital zoom. Its f/1.8 aperture is particularly good for creating bokeh effects by compressing the background and pulling it closer to the subject.

The Osmo Pocket 4P also features the latest version of DJI's ActiveTrack, which uses AI algorithms to maintain tracking lock at up to 12x zoom. It can actively track up to eight people, framing groups and centering anyone new who steps into the field of view.

RayNeo GT Max AR Glasses

The RayNeo GT Max AR Glasses are the world's first AR glasses to support Dolby Vision playback as part of creating a virtual cinema experience. They deliver up to 1,200 nits of perceived brightness, a 120Hz refresh rate, and real-time SDR to HDR conversion for super-clear images, too. Their optical system is 29% thinner and lighter than traditional designs, and delivers an industry-leading 59-degree field of view.

One of our favorite features is the adjustable virtual screen sizes, with a choice of 227 inches, 267 inches or 307 inches. That's clever: the tighter size is ideal for spreadsheets and productivity apps if you're using them as a display for a phone or laptop, while the larger sizes deliver immersive gaming and video.

Steady, Pinned and Follow modes enable you to anchor the screen or have it move with you, and 3DoF spatial tracking maintains the screen position without straining your eyes, and keeps subtitles, taskbars and image edges within the viewing area as you move. These look like the most advanced way to take a screen with you everywhere, and they could be indispensable for long flights.

TCL P80 Ultra

If you spend as much time on your phone as we do, you'll be blown away by the screen of the TCL P80 Ultra. It's the first phone to integrate NXTPAPER eye-comfort technology, with a 1.5K sharp AMOLED display for reflection-free reading even in bright sunlight, and a button that instantly turns your P80 Ultra into an e-reader with paper-like viewing.

The P80 Ultra has nano-etched anti-glare glass, eliminating surface reflections without reducing brightness. It also features circular polarized light technology, which changes the light output to more closely replicate the characteristics of natural light, and flicker-free dimming.

The camera's pretty special too. It's a 50MP 3x periscope telephoto lens with a 50MP 1/1.56-inch large-format sensor, capturing more light per pixel than smaller sensors and enabling 6x lossless zoom. Image stabilization eliminates motion blur in photos and video, and TCL's MuseFilm filters promise cinematic-quality images. But it's the groundbreaking display that really won us over — a lot of people will find it much kinder on the eyes.

Lenovo ThinkBook 14x Gen 2

Lenovo's ultra-light laptop makes even ultraportables look positively porky: at just 2.18lbs / 990g and just 12.9mm thick it's one of the lightest and thinnest laptops around, making it ideal for business travelers and students alike — especially if you opt for the backlit keyboard, which is really helpful in dimly lit rooms and airplanes.

Lenovo has somehow managed to give the ThinkBook 14x the super-thin treatment without sacrificing connectivity, so in addition to its Wi-Fi 7 it features two 10Gbps USB-C ports, two 5Gbps USB-A ports and an HDMI 2.1 port, so there's no need to haul a hub around with you. It also has a spare M.2 slot that enables you to expand its storage, which makes this a solid long-term investment.

The ThinkBook 14x Gen 2 is also one of the most customizable ultraportables, powered by Intel Core 7 (Series 3) processors and with display options including vivid OLED and touchscreen LCD. It's good-looking too, with a choice of metallic finishes including Luna Gray, Celestial White, Mystic Violet and Veil Blue.

EarFun Wave Pro X

EarFun's headphones consistently deliver premium performance without the premium price tag, and the Wave Pro X are the brand's best yet. They feature a patented dual-driver system that places a 40mm diamond-like carbon driver and a 10mm liquid crystal polymer driver on a precisely aligned axis, creating a more natural and detailed sound than you typically get from multi-driver designs.

The Wave Pro X feature an 8-mic AI system that continuously optimizes the hybrid ANC system, even in wired AUX mode, and the Qualcomm QCC3095 chipset delivers Bluetooth 6.0, aptX Lossless, LDAC, USB Audio and Auracast. Add AI translation and up to 90 hours of battery life to the mix and you've got a truly excellent pair of headphones — EarFun has been working on these for a long time, and even delayed them in order to get the tuning just right.

Urevo CyberPad 3

The CyberPad 3 is a home/office treadmill that's designed differently to traditional models. Its WalkFree Adaptive Speed Control uses pressure sensors built into the running board, which detect your stepping motion to automatically start and stop operation; when you're walking or running it takes data from the motor to calculate speed adjustments in real time.

Its multi-user support is smart too, capturing raw weight and stride-rate data to generate a structured user profile that's directly linked to the speed-control algorithm.

The support structure is made from Q235 steel with a side frame of die-cast aluminum, and it utilizes a redesigned transmission path to deliver an exceptionally compact construction: the ultra-slim body is under 11cm thick. Despite its small size it features a 15% incline-lift mechanism and a 42cm running belt, with its size based on analysis of human shoulder widths.

Plaud One

Plaud One is a wearable AI companion that combines three key features that are usually separate: wearable conversation capture, context that builds across day-to-day conversations, and AI that can analyze data and take appropriate action. It can capture online meetings, and face-to-face discussions and phone calls, and it has built-in eSIM and 4G LTE for phone-free operation.

What makes Plaud One different is that it understands context. Instead of treating each recording as a standalone transcript, it can retain context across multiple discussions — so a conversation from one meeting can be connected to a later conversation or call.

That understanding enables the Plaud Agent to help you take action, identifying next steps and completing tasks across tools such as Gmail, Google Calendar, Notion, and Slack.

Minisforum MS-S1 Max-P495

The MS-S1 Max-P495 delivers large-model AI computing from an exceptionally small footprint with a very high specification. It combines AMD Ryzen AI Max+ PRO 495 with up to 192GB of unified memory to run 128B+ LLMs locally, delivering up to 126 TOPS, and its unified memory architecture eliminates VRAM bottlenecks while also reducing latency.

That power is cooled by a high-performance thermal solution featuring a copper base, six heat pipes, dual fans and phase-change cooling, and it's encased in a fully scalable design, with a slide-out chassis for easy upgrading and a rack-ready form factor.

With 4x PCIe expansion, dual 10Gb Ethernet, dual 40Gbps USB4 v2, Wi-Fi 7, and a built-in 320W PSU, the MS-S1 Max-P495 delivers future-proof power for desktop systems and scalable AI clusters alike — it's a mind-blowing beast made to meet a new kind of research and development need.

XPPen Magic Pro 13

XPPen's Magic Pro 13 is a mobile drawing pad designed for creative pros, featuring an industry-first hardware-level drawing display mode that delivers low latency, native color output and higher bandwidth video transmission over a simple one-cable connection, giving you a paper-like experience with 16K pressure sensitivity and cursor hover support.

It's the first drawing pad in its category to come with dual-USB support, enabling you to benefit from a high-speed data connection while charging your Magic Pro 13.

The Magic Pro 13 features the new Shelf digital asset management system and XPPen's Canvas software, designed to deliver a simple and intuitive sketching experience for capturing ideas when inspiration strikes. And for creatives on the move it offers two thermal management modes, balancing performance and energy efficiency based on different creative scenarios.

Strutt ev1c

Strutt's ev1c reimagines the power chair with three major advancements: Strutt's evSense sensing array, a quad-drive drivetrain, and a modular, connected design.

eVSense uses two LiDARs, 10 time-of-flight sensors, six ultrasonics and two cameras to create 3D maps in real time, powering the Co-Pilot collision avoidance for people, pets, and edges, and the Auto-Pilot, which enables you to select on-screen destinations, or use LLM-powered voice commands such as "Take me to the kitchen" — basically it's a self-driving personal mobility vehicle.

The drivetrain features four-wheel independent suspension, ABS, active steering, and an integrated electronic stability program (ESP), safely managing 13-degree slopes, cobblestones and rough terrain without slippage or tipping. And when it's time to travel, it breaks down into five modules for easy trunk storage. It looks like a genuine move forward for this kind of mobility device.

xTool M2 Color Craft Laser

The xTool M2 is the first desktop machine to combine full-color CMYK printing, laser engraving and laser cutting into one enclosed Class 1 system, delivering a full print-then-cut workflow. Simply print your full-color design onto a piece of wood, leather or acrylic, and the xTool M2 Color Craft Laser cuts or engraves the exact contour with camera-guided precision. And there's a built-in air-assist pump, an industry first for a semiconductor laser, that keeps cut edges clean by reducing carbonization and yellowing.

Having these three capabilities in a single device is a huge power-up: instead of having to print on one machine and engrave or cut on another, you can turn your raw idea into a finished, professional-looking product in a single operation. It's ideal for stickers, labels, signage, personalized gifts, and small-batch products — you could start a whole business with this one device. And because it's an enclosed system, it's also very safe.

Perlegear AX1 Smart Adaptive Mount

The Perlegear AX1 Smart Adaptive Mount answers an interesting question: what if your TV mount was as smart as your TV? The AX1 is an AI-powered, motorized TV mount that can automatically adjust the height of your TV to different viewing positions, so for example you might have it low for solo TV watching, but raised for watching sports with friends, or for following an on-screen fitness app or motion-based game.

The AX1 is controllable via gesture commands, its mobile app, via remote control, or via Alexa, Google Assistant or Siri. It can distinguish between single- and multi-person viewing, with the latter calculating the best screen height for the group, and it's capable of moving a 200-pound / 90kg TV up to 15.7 inches / 400mm vertically, with real-time obstacle detection that stops and reverses the move if the path is blocked.

Speediance Gym Monster 3

The brilliantly named Gym Monster 3 delivers serious strength training for home workouts, combining the experience of a Smith machine, barbell, dumbbells, cable machine, rowing machine, pulley system, and squat rack into one streamlined setup with up to 200lbs / 90kg of intelligent digital resistance.

Twin 800W direct-drive motors deliver smooth, consistent resistance through every rep, and it's adjustable in one-pound / 0.45kg increments, so you can progress at your own pace, rather than make big jumps you might not be ready for.

The Gym Monster 3 is controlled via a clever Bluetooth Ring Control that enables you to make adjustments without stepping away or breaking your flow, and it features four dedicated training modes: Standard, Chain, Eccentric, and Fixed Speed. It also features a built-in AI coach that can guide you from your first session onwards.

Midea GreenApex Dishwasher

The humble dishwasher hasn't changed much since Josephine Cochrane's 1886 invention went electric in the late 1920s and gained spray arms in the 1950s. But the Midea GreenApex is very different from traditional grease-busters. It's a dual heat-pump system that uses a single coordinated heat pump platform to deliver washing, rapid drying, and dry storage in a single appliance.

The GreenApex is 50% more energy efficient than conventional dishwashers, delivers 30-minute rapid drying and 168 hours of dry storage without continued system operation, and offers gentle heat-pump drying at around 45°C, so you don't need to worry about high temperatures damaging more delicate items. It feels like a major leap forward for an appliance type that doesn't often have the phrase 'cutting-edge' associated with it.

Reolink OMVI 2i Ultra

The Reolink OMVI 2i Ultra Security Camera features an innovative, decoupled dual-lens tracking system in which the individual lenses operate fully independently of one another. Unlike in other dual-lens or hybrid zoom security cameras, the two lenses here are not mechanically linked, so the fixed 130-degree 4K wide-angle lens never moves, while the telephoto camera is free to rotate anywhere, including to cover areas outside the field of view of the main lens.

This means that when the 4K camera's on-device AI spots a person, vehicle or animal, it triggers the pan-tilt camera to lock onto and follow that subject even after they exit the wide camera's field of view — but you don't lose any recording from the wide camera's view during that time.

You can also use the wide-angle view to redirect the pan-tilt camera to a particular location by simply tapping that point in the live camera view, or have the wide camera and the pan-tilt camera monitoring two distinct locations, such as your driveway and a side gate.

Navimow H510 Pro

The Navimow H510 Pro features four key innovations: precise edge finishing, zero-turn steering, adaptive mowing intelligence, and 3D modelling.

Rather than edging with a trimmer line, which can be noisy and cause minor damage, the H510 Pro has an extendable robot arm that performs zero-gap edging quietly and safely — it's the most interesting and smart version of this technology that we've seen.

The all-wheel-drive system protects your turf too, with a zero-steering system that avoids dragging the wheels across the grass during lateral turns. And the Adaptive Mowing Intelligence feature analyzes grass growth patterns to determine the optimal mowing frequency, using the 1/3 cutting rule to preserve lawn health.

With 3D terrain modeling rather than the industry-standard 2D, and a sensor array including infrared as well as LiDAR and vision for low-light reliability, and triple-sensor avoidance to protect wildlife, the H510 is a smart solution for even the most challenging lawns.

DJI Romo 2 Series

The Romo 2 Series is a robot vacuum that won't be defeated by obstacles such as deep rugs, sliding door tracks and other barriers. That's because it has robotic legs that can step over obstacles as high as 4cm, and double-step thresholds up to an impressive 8.5cm.

It also features a built-in LiDAR-guided ultra-wide-swing robotic arm to extend the mop's reach, and its powerful suction system features an automatically lowering plate that forms a semi-seal on carpet for better extraction of dust and allergens.

The Romo 2 Series also benefits from the tech of DJI's flagship drones, with a Structured Light-Speckle projector and dual fish-eye vision sensors for full 3D depth perception. It can detect items such as cables and training pads as thin as 2mm, and its AI can distinguish between debris and liquid, as well as deal with transparent obstacles such as glass doors and mirrors.

Acer Vero 16

With so many laptops sacrificing easy maintenance and repairability for super-skinny styling, the Acer Vero 16 is a breath of fresh air. While it doesn't skimp on style or power — it's highly portable, delivers up to 180 platform TOPS with an Intel Core Ultra X9 processor 388H, and can be configured with a stunning 16-inch 3K OLED display — it's made with longevity in mind.

A tool-free latch provides easy access to the Vero's innards, and the battery and SSD are replaceable, while the system is designed to support the next two generations of processors if you want to upgrade. Fully 70% of the chassis consists of a blend of PCR (post-consumer recycled) and bio-based oyster shell material, and it meets US military standards for toughness. This is a laptop that's built to last, in a way that's rare to see — and very welcome.

Asus ProArt GR1X

The Asus ProArt GR1X is tiny, measuring just 150 x 150 x 51mm. But there's nothing small about its specification. Designed for advanced content creation and local AI workflows, it delivers data center-class compute inside a mini PC, removing the need to run LLMs remotely while eliminating cloud latency, cost, and IP protection concerns for pro creators.

The ProArt GR1X features the groundbreaking Nvidia RTX Spark 'superchip', which means you get a 20-core Grace CPU and a 6,144-core Blackwell GPU, delivering up to one petaflop of FP4 AI inference performance. With up to 128GB of LPDDR5X unified memory at 9,400MHz, it enables you to run up to 120B-parameter LLMs locally, and render entire 3D scenes on-device in Windows 11.

That kind of power demands highly efficient cooling, and Asus has developed an advanced precision-cooling system that delivers 1.6x more efficient thermal coverage than standard compact systems. Asus also solved the challenge of metal-enclosure signal attenuation by embedding the Wi-Fi 7 antennas behind a glass-like signal-transparent material. It's quite the design coup, and an impressive showcase for Nvidia's new elite chip.

EcoFlow STREAM 5000 / STREAM AC 5000

The EcoFlow Stream series is a plug-and-play modular system for residential solar energy generation and storage that's designed to be renter- and apartment-friendly. It can add battery storage and smart power-management to existing solar PV installations, as well as being employed to create a new home system from scratch.

The Stream Series features EcoFlow's Oasis 3.0 home energy management system, which understands dynamic energy tariffs, keeps an eye on the weather forecast, and continuously analyzes your home energy needs to optimize generation, storage and consumption.

That means you can give the EcoBot AI agent instructions such as "I need my car charged by 7am tomorrow at the lowest possible cost" and it will implement the necessary steps, or have your energy schedules reconfigured automatically when you have visitors or other instances of increased demand.

From October the EcoFlow Stream series will also get a new feature: Local Mode, which gives you uninterrupted operation and local app control even if there are cloud or connectivity outages. It's a very powerful (no pun intended) system that's been designed with the real world in mind.

Tapo D260

The Tapo D260 wired/wireless security camera is a video doorbell that delivers all the benefits of high-spec security without the potential downsides: it stores facial recognition data locally to protect privacy, and no features are locked behind a subscription. It's advanced, yet totally cost-free once you buy it.

It has 4K resolution, a wide 180-degree field of view to cover the entire doorway, and delivers sharp detail in subjects up to 30 feet away.

The D260 features multiple intelligent detection and recognition features, including radar as well as the obligatory infrared motion sensor. These enable it to discount false alerts from things such as moving branches or passing headlights, while on-device AI can recognize people, packages, vehicles, and animals.

If you wish, you can opt in to build a library of family and friends using facial recognition, and there's even a voice changer to disguise your voice when speaking to unfamiliar callers. In a world where people are sick of subscriptions, this offers a great security upgrade without the monthly fee.

• The Govee Sky Ceiling Light shifts according to time, weather, and mood
• It prioritizes flicker-free blue light when you want to concentrate
• It's Matter-compatible, unlike a recent skylight-style light from Philips

Smart lighting company Govee has launched a new smart ceiling light that changes color depending on the time of day, just like a real skylight — and can even use AI to shift its settings to suit your mood.

The Govee Sky Ceiling Light, which debuted at the IFA tech show in Berlin this week, can automatically adjust the light based on time and weather (ideal for rooms without natural light), and can prioritize Govee's sky blue spectrum when you want to feel energized (particularly handy if you're working from home).

A few months ago, Philips launched a new skylight-style light fitting that changes light temperature and brightness to suit the time of day. It looked very realistic, but without true smart home integration (the skylight is operated via a physical remote control), we found its starting price of €499.99 (about $580 / £430 / AU$810) a little hard to swallow.

The Govee Sky Ceiling Light, on the other hand, is Matter-compatible, so it can integrate with your other smart home devices. It's more affordable too, with a list price of $399.99 (about £300 / AU$560).

However, the Philips lamp has a few extra tricks up its sleeve, including an integrated UV-B module designed to support your body's natural production of vitamin D, and an IP44 rating for use in bathrooms — which often lack real windows. Its rectangular shape arguably looks more like a real skylight as well, particularly in homes with traditional styling.

I can see smart skylights becoming increasingly popular over the coming years, particularly for small homes, and it will be interesting to see how else brands manage to differentiate themselves. The Philips light isn't a Hue product, but it is made by the same parent company (Signify), so I wouldn't be at all surprised if we see a Philips Hue skylight this time next year.

• Segway Navimow has unveiled its Navimow H510 Pro lawnbot at IFA
• It features an extending, robotic arm for trimming lawn edges
• Also uses the brand's 'Xero-turn' technology for gentler turns

First, we had a robot vacuum with an arm for picking up socks. Now, limbs are making their way to robot lawn mowers too. The new Segway Navimow H510 Pro features its own mechanical arm, and this one is for trimming the edges of your lawn.

Effective edge-trimming has long been a problem for lawnbot-makers, and in recent years we've started to see side modules being added onto machines for exactly this purpose.

But Segway Navimow's solution is altogether cleaner: it has taken the main blade and mounted it on a robotic arm, so when the lawnbot is at the perimeter of a lawn the whole thing can reach out (by up to 2.9in / 7.4cm) to mow those edges. In fact, the brand promises 'zero-gap edge trimming' — no blade left unshorn.

I saw it being demoed at IFA 2026, and it was pretty majestic in action. You can see a clip below of the blade retracting back in.

The supporting software, called 'EdgeSense', coordinates the movement depending on the type of edge it's tackling. It'll react differently to hard edges (like walls and patios), soft edges (like flower beds) and irregular edges (table legs).

Because the edge trimmer and main mower use the same cutting deck, the results should be more consistent and even than if you were relying on two separate systems. Segway Navimow's aim is to "finally [close] the gap between robotic convenience and truly finished results".

One issue with finding a successful edge-cutting solution is how to handle the safety aspect of having blades protruding out from the bot's main shell protective casing.

On this front, Segway Navimow has added a side shield that provides a barrier against the blades. There's also "live-detection protection" that will shut off operation instantly when a human or animal approaches. The latter partly relies on heat-sensing to alert the lawnbot that there's a live creature about.

Smooth mover

The Segway Navimow H510 Pro uses the brand's 'Xero-Turn' technology. This tech was introduced at CES in January, and sees the lawnbot twist its wheels to effectively crab-walk its way around bends, so it won't churn up your grass.

There are further features to help the lawnbot tackle tricky terrain without risking damage to your turf. Each of the four wheels is independently powered (it's an AWD machine) to enable it to move with precision, and there's rear wheel suspension to maximize wheel contact at all times, even when the ground is uneven.

• Dyson has launched three new 'Nurovi' robot vacuums
• The R3 Nurovi Spot+Scrub UV has a roller mop and UV spill detection
• The R2 Nurovi Wash+Dry has two Reuleaux triangle mops, which move asymmetrically for no-gap cleaning
• The R1 Nurovi Dry is a vacuum-only bot, with no mopping

Dyson just unveiled a new fleet of robot vacuums with plenty of intriguing features. The range is called 'Nurovi' which is a portmanteau — the bots combine "Neural Intelligence technology" with Dyson's new "Vision system". It makes sense, but if anyone can remember how to spell it without checking, I'll be impressed.

There are three models in the lineup: the R3 Nurovi Spot+Scrub UV and R2 Nurovi Wash+Dry are both hybrid machines that can mop as well as vacuuming, and the R1 Nurovi Dry is a vacuum-only option.

I had a chance to check them all out at Dyson's IFA 2026-adjacent event in Berlin. Here, I also chatted to Nathan Lawson-McLean, a Senior Design Manager at Dyson, about the development process.

Light it up

Let's start with the flagship model: the R3. This is a second-gen upgrade of last year's Spot+Scrub Ai, and like that model it's designed to 'spot' concentrated messes and spills and scrub back and forth over them to clean them away. However, the R3 model's spill-spotting skills are powered by UV light.

"We continue to leverage our in-house vision systems and neural intelligence, to really build on this advanced stain detection," Lawson-McLean tells me. He explains that whereas with the Spot+Scrub Ai, Dyson focused on identifying a range of specific stains, here the team worked on tackling the invisible residue left by dried liquid spills. The UV light causes those stains to fluoresce.

"So as the robot's running around your home on its mission, it will now expose these totally invisible stains that become breeding grounds for bacteria," he explains. "And it will then go over it once, turn around, check, and repeat that movement."

I ask him what kinds of stains the system can tackle, and he tells me it's a wide range, including most sugary drinks, tonic water, sparkling water and milk. "I'll be honest with you, because I find you'd be surprised what fluoresces — a bit like a bowling alley in your own home," he adds.

Going in circles

Moving on to the R2 Nurovi Wash+Dry. A key difference between this and the R3 is that the R3 uses a roller mop for wet cleaning, whereas the R2 uses two spinning mop pads. Not just any spinning mop pads, though: rather than the circular pads we're used to seeing, Dyson has harnessed its geometry skills and given us a couple of Reuleaux triangles. You know — that triangular shape formed from three circular arcs.

Cleverly, the shapes move in tandem to create a straight-edged mopping finish with no center gaps — and they can get right into the corners of rooms too. As you can see in my photo image above, one of the pads can extend out to one side, to clean closer to the edges of rooms.

Both systems use heated water (158°F / 70°C on the R3, and 167°F / 75°C on the R2) to help cut through grease and tackle dried-on dirt. The heating part happens at the dock, rather than within the robot vacuum itself, to conserve battery. Some cooling will naturally take place as the mopping continues, but Lawson-McLean explains to me that the robovac is designed to return to the dock to top up with hot water when the on-bot reservoir drops below a certain temperature.

Large and small

The R2 has a sister model: the Dyson R1 Nurovi Dry. It's essentially an R2 but without the mopping functions, so those looking for a simpler and more afforable entry into the robovac market.

Both the R2 and R1 have a 'Twin-capture system' which separates fine and coarse debris in order to improve cleaning efficiency. "So traditional robot vacuum cleaners will just have one roller. And the balancing act is, well, I need to have a really open aperture to get large debris, — let's say like fusilli pasta, sweetcorn, things like that — but actually, when it comes to getting effective fine dust pickup from the floor, if I have a huge open aperture, all that airflow is wasted," says Lawson-McLean.

The solution was to have a large, open brush bar area for chunky particles, and a separate area for the fine dust, with, as Lawson-McLean describes it, "a highly concentrated and efficient airflow path that's sealed down to the floor."

Finally, both the R2 and R1 boast another feature ported over from Dyson's most advanced stick vacuums: a piezo sensor that intelligently detects the size and amount of dust around, and the floor type, and adapts its suction power to suit. The aim is to deliver an efficient clean without wasting any battery. This intelligent adjustment will kick in if the bot is set to Auto mode.

Dyson has a chequered history when it comes to robot vacuums. The Dyson 360 Vis Nav suffered from a too-high price given its feature set, and was crippled by navigation issues. Last year's Spot+Scrub Ai wasn't quite a roaring success, but did go some way to repairing the brand's robot vacuum reputation. Will Dyson continue its upward trajectory with these new launches? I'll be watching with interest.

Buying information

From Dyson US, the Dyson R3 Nurovi Spot+Scrub UV robot vacuum is scheduled to go on sale on 15 September, at a list price of $1,199. The R2 Nurovi Wash+Dry went on sale on 3 Sept, exclusively at Costco, for $699 (it'll be available direct from Dyson further down the line, but not via any other third party retailers). The R1 Nurovi Dry is also scheduled to go on sale this month, at an as-yet-unknown date, with a list price of $549.

At Dyson UK and Dyson Australia, the R2 and R1 went on sale yesterday (4 Sept) at a list price of £749.99/ AU$1,449 for the R2 and £499.99 / AU$949 fro the R1. In both territories the R3 is scheduled to launch in early 2027, pricing TBC.

George Yianni is excited about the future of smart lighting, and his enthusiasm is infectious. As the Chief Technology Officer and Founder of Philips Hue, Yianni has seen smart home tech move from niche to mainstream — and he has a clear vision for how you'll be lighting your home in years to come.

On September 2, Philips Hue held its annual showcase event in Berlin, just around the corner from the IFA tech expo. There, Yianni and other senior figures took to the stage to show off the brand's latest hardware (including some particularly artistic new lights and more affordable syncing devices), and to explain how new software developments will change how we all interact with lighting in the coming months.

After the event I had the opportunity to speak with Yianni, and to delve deeper into how Hue (and its parent company SIgnify) has identified practical uses for AI that aren't just a gimmick.

"There’s a push for AI for the sake of it, and we’ve really tried to shy away from that," he told me. "AI large language models are really good at processing the unstructured information and turning it into something structured, and vice versa, and that’s really where we applied it."

The first example he gave was SpatialAware — a feature that launched last year, which creates lighting scenes and applies them based on the position of lights in your room.

"We’re applying AI as a tool to deliver functionality," Yianni explained. "So what we launched last year is, we spent quite some time with our lighting designers to produce the right set of rules, tools, and training towards a large language model to codify and scale the lighting design process."

"So it can take all the unstructured information of where lights are in space, lighting design rules, and what colors look complementary, and then expose that to the user in a general way, so they can describe anything they want, and it uses its world knowledge and this lighting design skill set we’ve given it to generate new lighting design scenes for them. It’s really not something you could have done any other way."

The second example, which debuted at this year's event, is Custom AI Behaviors. This lets you use natural language to describe how you want your Philips Hue lights to behave. For example, you can ask them to behave differently on weekends and weekdays, or change scenes automatically at sunset — all without fiddling around with complex settings.

"There are so many different diversities and details about how a consumer might want their home to behave that we cannot build a user interface with buttons, toggles, dropdown menus for every possibility, and that’s why we put some limitations around automations to this point," Yianni explained. "Otherwise, the user interface would be impossible for most users.

"But natural language is a fantastic way to just describe arbitrarily how you would like your home to behave, and then we can use AI to translate that into a special programming language we’ve developed that runs the automation in the Bridge. So it’s a fantastic way to capture intent and translate into something we can just run in the background, and again, AI is the right tool to do that.

"We think of AI as a tool to be used to solve problems, and often it’s not the right tool, and then we don’t do it that way. But there are definitely are good use cases, and I think more in the works, which take advantage of it."

Exciting developments

The Philips Hue event was packed with new announcements, so I took the opportunity to ask Yianni which one he was most excited about personally. For him, accessibility was one of the biggest draws.

"It's a little bit difficult to choose, because I think we've made some great products for users that don't have smart lights yet," he said. "I think what we've done with entertainment is super exciting, to just make it so that even if people don't want a smart lighting system, they just want it around [their TV]. Now we give you a very simple, easy to use and understand kit that gives it to you."

This system is the Philips Hue Play Screen Sync, which is designed for people who aren't using an HDMI source for their TV, and may be using a native smart TV app, for example. Screen Sync uses a camera with a fish-eye lens to monitor what's on the screen, and then synchronize those colors with a light strip behind the TV. You don't have to invest in a Philips Hue Bridge to use Screen Sync either — you can use it with a single light strip via Bluetooth if you're not interested in a full Philips Hue setup.

If you do use an HDMI source for your TV, there's now a more affordable 4K version of the Philips Hue Play HDMI Sync Box, which also works with a single Hue light and no Bridge.

Yianni is also particularly proud of what the brand has achieved so far with artificial intelligence. "I think for our install base of users and for ourselves as users of Hue personally, the AI automations are a bit of a game changer," he said. "I now can finally have my home behave exactly the way I wanted to. I think that's a really big deal.

"So I'm a bit torn between those two, right? For me, it's AI automations, but I think for our business and for our overall mission of getting people to use lights in a in a richer way than just being on or off, I think the the bridge-less entertainment with just becomes so much easier to to step in with just that use case, which is a great way to start."

When it comes to the lights themselves, though, Yianni has a clear favorite: the Liane 360-degree rope light (pictured at the top of this article), which users can drape in any way they like, and which projects light around its whole circumference.

"I think it's hard to beat the statement of Liane," he told me. "I think it's really taking what we offer in a in a new direction, where you can really unleash a lot of creativity in users because it's really a product which has a lot of different ways of it being applied. I think it's something quite unique that doesn't exist in the world yet.

"Yeah, these as they omnidirectional rope lights exist in architectural lighting, but I really think we we add a new element of depth to it by making it controllable and having these subtle gradients that we can put on it. I think that's really exciting. It's something that doesn't exist in the world yet, and really adds something to an existing trend. I think that I think the most exciting lighting model."

I'm hoping to test the Liane rope light very soon to see whether it meets those expectations, so watch this space.

• Google has fixed a setup issue with the first-gen Chromecast device
• Owners have been complaining for months about their devices going missing from the Google Home app
• The update also fixes functionality issues

Have you been running into setup issues with your older Chromecast and Google Home devices? You’ll be happy to hear you’re not alone on this one — and even happier to know that Google has finally rolled out a fix.

These issues first arose when Google announced it would be ending support for its oldest Chromecast dongles back in May. From there, owners started reporting problems with setting up their devices after they started disappearing from the Google Home app on Android.

A Google Home app update made setting up Chromecast even more difficult which, understandably, sparked a lot of worry for those who are still using the first-gen Chromecast from over 10 years ago, convincing them that Google was officially pulling the plug on its OG streaming device. Similar issues then started cropping up for owners of the 2015 Chromecast model and Google Home Mini speaker, affecting functionality as well as the setup process.

At first, users were left to find their own workarounds and solutions, with many having to factory reset their devices, revert to older versions of the Google Home app, or even wipe their entire Home ecosystem to start afresh. Thankfully, Google has solved this, implying that these setup and functionality crashes were part of a software glitch.

The Google Nest Community account on Reddit replied to a series of frustrated posts with the following statement: ‘We've resolved an issue that was impacting the ability to set up some older Chromecast and Google Home devices. If you haven't already, factory reset your speaker or update your Google Home app to version 4.26 and try again’.

It hasn’t been the best time to be a first-gen Chromecast owner to say the least, but at least Google’s latest fix offers some reassurance that the company isn’t writing off its oldest streaming device yet — despite pulling the first Chromecast from shelves in early 2025. That said, Google isn’t the first tech giant to be accused of intentionally bricking older streaming devices to get users to upgrade.

Amazon received similar backlash when a user filed a lawsuit against the company, after reporting that two Fire TV sticks ran into severe performance issues just a few years after purchasing them. The user claimed that Amazon had been software tethering, while not disclosing the truth about the lifespan of its Fire TV stick streamers.

Now that Google has found a solution, hopefully it does the job at reviving your older Chromecast model. If the issues still persist, Google recommends reaching back out to the Nest community to let them know.

Philips Hue smart lights just got a major upgrade, with a new system that lets you sync lights with your TV screen regardless of its source. Signify, the company behind the Hue brand, showed off a new system called Hue Play Screen Sync at an event (no, not IFA) in Berlin yesterday, and it looks set to make immersive entertainment lighting a lot more accessible.

The Philips Hue Play system lets you use smart lights (including light strips and bars) to extend the colors from your screen, creating a more immersive viewing experience. However, until now, this could only be done using a Philips Hue HDMI Sync Box, which sits in between an HDMI source and your TV. If you want to watch content via a non-HDMI source, such as a native app on your smart TV, you were out of luck.

The new Philips Hue Play Screen Sync changes all that, using a fisheye camera to monitor the action on your TV screen and synchronize it with your smart lights, regardless of the source.

Similar systems already exist from rivals including Govee and Nanoleaf, so I'll be interested to see how the Hue Play Screen Sync compares. Camera-based systems usually have a few drawbacks compared to HDMI screen syncing (they can be affected by reflections on your TV screen and tend to have more latency) but hopefully the Hue system will offer performance comparable with the HDMI Sync Box.

A bright future

Another big update launched at yesterday's event is Custom AI Behaviors, which lets you use natural language to describe lighting automations, rather than having to create them manually — something that could be quite time-consuming or fiddly when done in the app. For example, you might choose to have your lights behave differently at the weekends, or activate a particular scene automatically after dark.

The Philips Hue app already contained an AI assistant the let you use text or speech to describe a lighting scene (such as 'something for Christmas' or 'a tropical sunset'), and would search the existing scene library for a match. If none existed, the assistant would create something suitable for you. This was a useful feature, but Custom AI Behaviors goes far beyond that, and should make advanced automations much more accessible, with no need to spend time fiddling with switches and sliders.

On the subject of accessibility, there is now a 4K version of the Philips Hue Sync Box to accompany the 8K version launched in 2024. The 4K Sync Box is more affordable than the 8K model, and for the first time, you can use it to sync a single light with your TV via Bluetooth, without a Philips Hue Bridge.

Third-party collaborations are coming as well, including one leaked last week, which allows you to integrate Nanoleaf Shapes lights into your Hue lighting setup, and a collaboration with Sonos that will let you control the brand's speakers with selected Hue switches.

There's a huge bundle of new smart lights too, including Festavia curtain, net, and icicle lights (ideal for Halloween and Christmas), a Philips Hue Liane 360-degree rope light, with LEDs around the entire circumference, and an OmniGlow outdoor strip light. Omniglow is a technology that uses tightly packed LEDs to create an extra smooth gradient, with no visible gaps, and this is the first time it's been available for an exterior light.

I'm hoping to test some of the new lights soon, and will bring you full hands-on reviews as soon as possible.

• A new IKEA device called the Liljebagge has appeared
• It's an affordable smart radiator thermostat
• We're still waiting to hear on international availability

IKEA isn't slowing down when it comes to launching smart home products — see the smart sensors and wireless lights it's already pushed out this year, for example — and the latest new device to catch our eye is a smart radiator thermostat called the IKEA Liljebagge.

We're relying on WinFuture and a fair bit of Google Translate to tease out the details here, but it seems there's support for the Matter and Thread standards, and a retail price of just €15 (that's roughly $17.40 / £12.90 / AU$24.30).

The WinFuture article talks about IKEA "preparing" to launch this thermostat, but it's already popped up on the IKEA website in Sweden. We can't see it on any other international sites as yet, though — we've asked IKEA for clarification on US and UK availability and will update this article if we hear back.

As per the official listing, installing the Liljebagge means you can "adjust the temperature in each room individually, control it when you’re away, increase comfort and reduce energy use", and it should fit "most water-based radiators".

Aggressively priced

You're able to control the smart radiator thermostat from the IKEA Home app on your phone, or directly on the device itself. If you want it cooler in the bedroom and warmer in the study, then this makes it possible without much hassle.

IKEA's contender is particularly cheap compared to other smart thermostats that do the same job, and price is typically something IKEA likes to compete aggressively on (see also its $10 / £10 speakers, for instance).

Some other details: the built-in display turns off when you're not using it, so your radiators won't always be glowing, and you're able to adjust the temperature in 0.5-degree Celsius increments using plus and minus buttons.

On the home network integrations, it seems you'll need a Thread border router to use this on a Matter network. If you're going to go the IKEA route, you'll need the Dirigera hub. Power is provided by two AA batteries, which should last you 18 months. We'll update this story as soon as we hear anything about international availability.

• Smart home brand Shelly announced its new security camera ahead of IFA 2026
• It lets you view and store footage to microSD cards with no additional subscription cost
• You can upgrade to Shelly Premium for cloud-based storage and other smart features

The early IFA 2026 product announcements have started, and home tech company Shelly has unveiled its new smart home security camera — and I think it has a shot at becoming the next cheap Ring alternative.

The new indoor Shelly Camera is the latest affordable smart home device designed for those who want similar features to those found in the best home security doorbells, but want to avoid the catch of additional subscription fees.

With a reasonable $49.99/£35 (approximately AU$65) price tag, the Shelly Camera sports all the basic features you need to ensure your home is covered to give you added peace of mind. Though the camera’s video quality isn’t as advanced as the Ring Outdoor Cam Pro’s 4K resolution (Shelly’s is limited to 1080P), its other features more than make up for it.

As well as 110-degree horizontal and 70-degree vertical fields of view, which should be enough to cover a single room, the Shelly Camera supports black-and-white night vision monitoring and is compatible with Alexa, Google Home, and Samsung SmartThings. It’s also built to slot easily into your existing Shelly smart home ecosystem, working with other devices to trigger automations and activate lighting when movement is detected.

While many leading smart-home brands require you to sign up to a subscription in order to use their devices to their full potential, that’s not the case with the Shelly Camera.

One of the best parts about this camera is that it packs a fair amount of features that aren’t locked behind a subscription paywall. This includes its resolution specs mentioned above, as well as automations and two-way audio — but its free video storage is what makes the camera a winner.

As well as simply viewing live footage from your smartphone without saving it, you can save recordings locally on microSD cards, and though you’ll have to purchase SD cards separately, it works out a whole lot cheaper than a monthly subscription fee.

For a $50 security camera that gives you access to basic tools and a way to store footage locally for free, you really can’t go wrong. And for those who aren’t too savvy about their smart-home tech, these features should be more than sufficient.

All that said, Shelly does offer a premium tier for additional smarts. At 3.99 euros a month ($4.40 / £3.40 / AU$6.50), Shelly Premium gives you access to cloud-based storage for one camera, and even smarter automation upgrades. This includes AI-powered object-detection capabilities, allowing your device to easily distinguish between faces, pets, and even vehicles to trigger specific alerts, which you can customize.

Having a Shelly Premium subscription opens the door to a handful of additional capabilities to enhance your home security ecosystem, but I don’t think you’re missing out on too much if you decide to stick with its free, basic tier.

For the most part, it’s the storage element that convinces users to cave into subscription models, and here that's not a factor if you're happy to go with the SD card option — and the camera comes with a free three-month trial of Shelly Premium, so you can try out those extra features before deciding whether or not you need the subscription.

• SweepLED can spot hidden cameras by varying its illumination
• AI can detect camera lenses by the light that gets reflected back
• The accessory fits on the back of a camera and works in seconds

Unless you're in the safety of your own home, there's always a worry that you're being surveilled without your knowledge — when you're in an Airbnb, hotel room, changing room, or restroom, for example. Now researchers have developed an LED-powered phone accessory to give you some extra peace of mind.

It's called SweepLED, and it's the invention of a team from the Korea Advanced Institute of Science and Technology (KAIST). The portable device combines 15 LED lights, a cable to attach to your phone, and some AI processing.

According to the researchers, SweepLED can spot hidden cameras 94% of the time with a processing period of just five seconds per object. While this is only a prototype for now, the team has tested it on 30 different objects, reporting a high level of skill at identifying where hidden cameras are embedded (or not).

Here's how it works: SweepLED fixes to the back of a phone (over the camera). As video is recorded and the phone stays still, the add-on turns its LEDs on and off, comparing different reflection patterns against each other. Hidden camera lenses show up in those reflection patterns in a way that standard reflective surfaces don't.

Protecting your privacy

"Hidden cameras pose a serious threat to personal safety and privacy in everyday spaces," says Professor Jun Han, from the KAIST team. "This research is meaningful in that it combines low-cost smartphone-based hardware with AI analysis to present the possibility of a practical detection technology that even non-experts can use."

Previous devices along these lines required users to look for 'bright spots' manually as they were lit up by the detector, the tell-tale sign that there was a camera looking back at them. This should be more efficient, and better at spotting different camera types hidden in a variety of different housings (like clocks or mirrors).

There's still plenty of work to do to get this refined and commercialized, but it shouldn't be expensive: the KAIST team reckons the manufacturing cost of SweepLED would be in the region of $7 (about £5 / AU$10).

If you do a lot of traveling, it might be worth investing in something like this just to make sure you're not being spied on. The work has been presented at the ACM MobiSys 2026 conference and published online, though as yet there's no indication of when it might be available to the masses.

• There's more evidence of a tie-in with Philips Hue and Nanoleaf
• An official support page appeared and then disappeared
• We could get an announcement about this later in the week

A few days ago we heard some whispers that Philips Hue would be adding support for Nanoleaf Shapes, meaning these lights could be controlled in the app — and now the integration has almost been officially confirmed.

As spotted by Android Authority, a support page for the Nanoleaf integration briefly went up on the Philips Hue website, explaining the types of light that would be supported, and explaining a little bit about how the tie-in will work.

That support page has now promptly disappeared again, suggesting that it was put up too early by mistake. According to the initial rumor, Philips Hue will be adding support for Nanoleaf integration on Thursday, September 3, which seems about right.

Put together that first leak and the brief appearance of an official support page, and it's now looking extremely likely that this will happen. However, until Philips Hue makes the announcement, nothing is guaranteed.

Nanoleaf panels behaving like Hue lights

According to the support page that has now been yanked from the web, the integration means Nanoleaf panels will "behave like a Hue light, ready to be used across your entire smart lighting setup".

There was also a line saying that Nanoleaf panels behave similarly to a gradient striplight", so you should be able to use the standard color wheel in the Philips Hue app to adjust the colors of the Nanoleaf panels you've got connected.

All of this will be made possible through a Philips Hue Wall Light Module that will connect to Nanoleaf devices. The support document lists Nanoleaf Hexagons, Triangles, and Mini Triangles as the smart lights that are going to be supported.

While there are still some questions about exactly how the connectivity is going to work — with a lot of smart home standards to account for — this seems like good news for both Philips Hue and Nanoleaf users.

• Dreame has reportedly cancelled all its car projects
• The firm's expansion plans seemed "too fast and too wide-reaching"
• Rocket-boosted performance always seemed unlikely

When we went down to CES in January, we were in for a big surprise: Dreame, the brand we know primarily from its impressive robot vacuum cleaners, and hair stylers, was expanding into pretty much everything — including making a supercar.

As we said at the time, the world domination scheme didn't seem like the best of plans. "It all just seems too fast and too wide-reaching for it to have been done with the required care and expertise," we said, noting that we were finding it hard to get any actual details of the multiple proposed products.

But Dreame kept on going with the announcements, and in April it declared that not only would it be making a hypercar after its supercar, but the hypercar would be able to reach 62mph in 0.9 seconds thanks to its "custom-built dual solid rocket boosters".

This week, Car News China reported that Dreame was shuttering all its car programs, while another report cast serious doubt on whether there was any real intention of making those vehicles beyond prototypes.

What happened to Dreame's hypercars?

Dreame had announced two cars: the 1,867 horsepower Dreame Nebula 1, and the rocket-powered Dreame Nebula NEXT 01 Jet Edition. But it seems the products may have been inspired less by a desire to make production cars and perhaps more by a desire to emulate Elon Musk.

According to a report in China Economy, seen by the EV site Elektrek, internal sources told the publication that "the car was more of a marketing and fundraising effort rather than a genuine manufacturing effort" — which makes it sound much like the Tesla Roadster "flying" SpaceX edition that Musk has been promising since 2021. The latest news on that project predicted a demo "as early as this month", but there's no sign of it so far.

The report also suggests that Dreame's vehicle department wasn't really structured very effectively and may have encountered regulatory issues.

A tech firm pivoting into the car business isn't a ludicrous idea — Xiaomi's doing some fascinating things on four wheels — and the things robovac companies excel at, such as navigation, obstacle avoidance and autonomous driving are directly relevant to EVs. Global firms also have excellent supply chains and distribution networks.

But for every Xiaomi SUV there's an abandoned Apple Car, PlayStation Car or Dyson Car proving that for some gadget firms, getting into the car business sucks.

• Philips Hue could be launching a light module that lets you connect your Nanoleaf Shapes to the Hue app
• You'll be able to integrate Nanoleaf lights into your Hue schedules and automations
• It's not Matter-over-Thread, but you might be able to use a Hue Bridge for third-party connectivity

We’re just one week from IFA 2026, and we already have our ears to the ground for all the pre-event announcements and rumors — and this latest Philips Hue leak is bound to make Nanoleaf users very happy.

As spotted by the outlet Smartlights, Philips is reportedly launching the Hue Wall Light Module next week, meaning that users will be able to integrate their Nanoleaf lights into the Philips Hue ecosystem — which would be a huge win, especially since Nanoleaf is an affordable alternative to the Philips Hue range of best smart lights.

The Hue Wall Light Module is said to support the Nanoleaf Shapes LED panels, including Mini Triangles, Triangles, and Hexagons, while older panels (formerly known as Aurora) won’t be supported. Philips’ new module is also expected to be announced on September 3, and will go on sale for 39.99 euros, with international prices expected to follow.

Essentially, the rumored Hue module is a small white adapter around 8cm that you can plug directly into the connectors in your Nanoleaf panels, allowing you to integrate up to 100 Nanoleaf Shapes panels into your Hue system. That said, the Hue Wall Light Module shouldn’t be confused with the existing Philips Hue Wall Switch Module, which is installed behind a standard wall switch.

Once your Nanoleaf panels are connected via Philips’ new module, you’ll be able to include them in automations, Hue scenes, and schedules in the Hue app — but whether Nanoleaf’s flagship lighting tools will be carried over is unclear.

Similar to Philips Hue, Nanoleaf offers customizable color scenes and animations, but as far as the leaks go, the product images show the Nanoleaf integration working primarily with Hue scenes and effects. The leak shows at least five points in the color selection wheel, suggesting that there’ll be some kind of multicolor control function regardless, but we’ll have to see how this will work after the launch.

The other catch is that the Philips Hue Wall Light Module isn’t Matter-over-Thread, which, considering Nanoleaf’s devices are mainly Thread- and Matter-supported, is a bit of a departure. Instead, the module uses Zigbee and Bluetooth, the main connectivity protocols Philips has used for some time.

That said, using a Hue Bridge allows you to connect Philips Hue devices that are non-Matter to hubs such as the Apple HomePod, which is helpful if you use the best smart speakers to control your home lighting system — though we’ll have to wait and see how the new Philips Hue module handles third-party connectivity once it’s launched.

Despite these gray areas, the Nanoleaf-Hue integration is an unexpected yet possibly beneficial upgrade. When it comes to smart lighting brands, their respective devices tend to keep you locked into one ecosystem or the other, so having a simple but effective connectivity tool would give users much more flexibility.

• Google is rolling out a new Gemini for Home update to fix voice commands for Spotify
• The company is also fixing message broadcasting and smart light controls
• Despite the upgrades, users are criticizing Google for not fixing the issues they've been experiencing for a while

The transition to Gemini has been rough — even Google knows that, but the latest Google Home update aims to tackle a handful of pain points with voice commands.

In an announcement issued yesterday (August 20), Google shared three fixes coming to the Gemini for Home voice assistant, which is still in early access. Additionally, features in the Google Home app are also tipped to get a glow-up.

The first voice command fix is for Spotify requests, which Google says has been improved to better recognize the artists, songs, and playlists you ask your Google smart speaker to play. More often than not, Gemini for Home has struggled to register commands when you ask it to launch certain playlists, while other voice commands have been interpreted as music requests.

Now, you can get your smart hub to play specific personal playlists, such as your Liked songs, and it will produce smoother results, but Google adds that Personal Results need to be enabled to request things like Liked songs and personal playlists.

As well as Spotify improvements, Google says it’s updated message broadcasting, which now works as a two-step process. The first step requires you to say ‘Hey Google, broadcast message’, and after a short wait, you can follow up with your message as a second command. Previously, you had to broadcast your message in one long voice request, so this fix removes the chance of miscommunication.

Lastly, Google is letting you be even more precise with adjusting the lighting in your home. The Gemini for Home update now lets you set your smart lights to a specific color temperature to create the perfect ambiance for a movie night or an evening soiree with friends. You can try saying, ‘Hey Google, make the living room lights 2700 kelvins,’ and your lights will change accordingly.

Useful upgrades, but there’s more to be done

Google began phasing out the old Google Assistant across its ecosystem of devices in 2025, and it will be shut down for good on Android and Wear OS devices on September 4 in favor of Gemini. The same goes for smart home devices, but the switch to Gemini for Home has been far from smooth.

Though the Spotify fixes and other voice request updates are welcomed solutions, user have called Google out for glossing over the main issues that have been plaguing their experiences, and there’s still a lot more work to be done to fix surface-level features.

Redditors who are also long-time Google Home users have shared their struggles with the transition; one user says, ‘the move to Gemini has been rough for us,’ recalling that basic household commands such as setting alarms are still hit-or-miss for them. ‘I just hope this all gets fixed soon,’ they added.

Luckily, they’re not the only one riding the struggle bus. Another user says they’re still experiencing issues with creating and scheduling basic automations for their thermostat, while a user with multiple Google devices says that Gemini is still unable to answer simple questions like ‘how long to cook a sweet potato’ — despite resetting their devices four times.

Not all the best smart speakers are perfect, but the rising reports of Gemini for Home’s ill performance are worrying for the future of Google’s smart home ecosystem. The updates are rolling out at too slow a pace, and users are already starting to lose trust.

• Google is building on its new Insulin Resistance Trends health feature with PhotoScan
• PhotoScan is 'an investigational deep learning framework' that can estimate body fat using a phone's camera with 'near DXA accuracy'
• It's not yet available to the public, but the research 'demonstrate[s] the feasibility' of such features

As the Google Pixel Watch 5 launched last week alongside a slew of new Pixel phones, one of the most interesting new developments was the introduction of the Pixel Watch's new Health Guardian suite of tools, including Insulin Resistance Trends.

Insulin Resistance Trends showcases a month-by-month breakdown containing estimations of how your body responded to blood sugar spikes — a crucial component in weight management and the development of Type-2 diabetes.

Body composition — your ratio of different kinds of fat, skeletal muscle, and bone — is also an excellent marker of insulin resistance and metabolic health, so body scans are often used to help determine insulin resistance. Body comp is often measured with medical-grade 'DXA' scans, which use X-Rays, or commercially available devices at home.

These home devices can be the best smart scales or even some smartwatches, such as the Samsung Galaxy Watch Ultra 2. Without medical DXA scanners, they usually use a process called 'bioelectrical impedence analysis', or BIA. A low-level electric current is sent through the user's body, moving through fat, muscle, and bone at different speeds. The speed of the electrical current helps the device estimate the percentages of each material in the body: a useful thing to have on a health-monitoring device like a smartwatch.

However, Google is busy researching an even more accurate version of a body scan without using any specialist equipment or BIA kit — in fact, it's just a smartphone camera and an onboard AI model. This in-development feature is called PhotoScan, appropriately.

According to its research blog, Google has been developing PhotoScan by matching smartphone photographs of subjects with medical-grade DXA scans, along with other subject information, then running it all through an AI model. The AI model eventually achieved 'strong DXA agreement' when estimating body fat percentage and other metrics, leading to 'near-DXA accuracy for predicting insulin resistance'.

The researchers conclude that 'clinical DXA imaging delivers the most accurate body composition but lacks scalability, whereas wearable BIA sensors offer convenience but are limited to basic body fat percentage.

'Our PhotoScan approach offers a promising middle ground, estimating granular body composition from standard smartphone imagery with near-DXA accuracy.' Sorry, Samsung — it looks like we'll be pivoting away from BIA sensors and towards smartphone cameras for body fat percentage calculation in future.

While the technology doesn't seem to be commercially available yet, it does 'demonstrate the feasibility of smartphone-based body composition estimation,' and I'd be surprised not to see it make its way to the best Pixel phones eventually.

RunStar 4E Body Scale: One minute review

The RunStar 4E is an affordable smart scale that costs little more than a standard set of electrical scales. Considering it measures more than 20 different body composition metrics, the low price becomes even more impressive. As you’d expect at this price, there are limitations though, with the inability to measure composition accurately (fat-to-muscle ratios and so on) being the most glaring one.

Despite these shortcomings, everything, from app setup to using the scales, is smooth, straightforward, and wonderfully intuitive. Connecting the scales to the companion app is quick and easy thanks to a robust Bluetooth signal, and the option to create multiple users within the app is a nice touch for a family of my size and stage.

The weight measurement consistently measured around 0.4% more than the pricier RunStar 8E SmartScan Pro, which isn’t a massive deviation. For almost all the other measurements, the RunStar 4E adopts a bioelectrical impedance analysis (BIA) measuring method through four metal sensors located on the top panel of the scale.

BMI measurements were almost identical every single time compared to the 8E SmartScan Pro (probably because it's a mathematical calculation not dependent on the electrodes), but almost all other composition measurements offered up a deviation of between 3 and 30%. For these reasons, it’s not likely to make it into our best smart scales guide. That said, for the price, the RunStar 4E is a respectable set of scales for weight and quick BMI calculation.

RunStar 4E Body Scale: Specifications

RunStar 4E Body Scale: Price and availability

• $33.54 / £31.00
• Not available in Australia
• Budget-friendly smart scale

At $33.54 USD / £31.00 GBP, the RunStar 4E Body Scale is incredibly affordable as far as smart scales go. It might lack full body measurements for fat loss and fitness and muscle gain, but for that pleasure you’ll have to part with a lot more money and shoot for something like the RunStar 8E SmartScan Pro, Withings Body Scan series, or Wyze Scale X.

A comparable option in terms of price and features would be the Vitafit Smart Bathroom Scale, which scored a respectable four stars in our testing. Positives included the easy connection, extremely fast results, and the comprehensive app. Our reviewer had some concerns over accuracy, but overall it’s a solid choice.

The scales are FSA and HSA eligible, which means US users are able to use them in conjunction with designating pre-tax money to be taken from pay and put towards paying medical expenses.

• Value score 4.5/5

RunStar 4E Body Scale: Design

• LCD display with color graphics
• Compact and lightweight design
• Powered by 3x AAA batteries

At the heart of the RunStar 4E is a bright LCD display that provides an easy-to-access readout of six metrics: weight, body fat, BMI, muscle mass, body water, and bone mass. The display cycles through these with a few seconds given over to each stat. Unfortunately there’s no way to move to a specific metric using on-device controls, although the full list is available in the accompanying app.

At 11.02 x 11.02 x 0.78 inches and 3.17 pounds, the smart scale is both compact and lightweight. As a result, finding a suitable spot for it in a bathroom or bedroom shouldn’t be a problem. It can also be easily stowed on its side in a cupboard while not in use.

The scale is covered in 6mm tempered glass, which protects against scratches and cracks, neither of which I suffered despite my children doing their accidental best to inflict a dent or two. Underneath you’ll find four anti-slip silicone feet.

Quick and effortless connectivity is via Bluetooth, and power is delivered courtesy of three AAA batteries. USB-C charging would have been better for the environment, but with minimal power required, I don’t envisage getting through too many batteries.

• Design Score: 4/5

RunStar 4E Body Scale: Features

• 22 reportable metrics including weight, BMI, and muscle mass
• App supports multiple users

The RunStar 4E boasts an impressive feature set for such an affordable scale, or at least it would be if the extras were more impressive. At its core, the scale is capable of measuring over 20 metrics, including weight, BMI, body fat percentage, body mass, muscle mass, body water rate, bone mass, and visceral fat. Six of these are visible on the smart scale itself, while the full set is reported in the Starfit RunStar app.

To accommodate families, the Starfit app enables users to set up multiple profiles, one for each family member. By entering the height and target weight of each person, the app is able to provide more accurate and informed reporting. The app also tracks measurements over time and plots them on a chart for trend analysis.

• Features Score: 4/5

RunStar 4E Body Scale: Performance

• Quick results on-device and in-app
• Accurate weight, BMI, and metabolic age
• Some inaccuracies consistently reported

The first thing to note is that the RunStar 4E is quick. In a matter of seconds the scale is able to measure over 20 different body composition metrics and display them instantly in the app. There’s no waiting around for calculations to be made and zero lag when the display is cycling through the six core metrics.

Weight, as you’d expect, is measured prior to all the body composition elements. Having measured myself hundreds of times, I found that the 4E regularly mismeasured my weight by around 0.4% compared to the RunStar 8E SmartScan Pro and, indeed, my rudimentary pair of digital weight scales. It would be unfair to judge the scales too harshly for this small deviation, especially given the price.

According to research published in the Journal of Medical Internet Research, one study conducted on smart scales shows a median margin of error of around 0.3kgs, so I can forgive it some small deviation. That said, if you’re requiring absolute accuracy, you’ll need to look elsewhere.

BMI was also consistently measured more or less accurately, with deviations of only 0.5%. If you’re only concerned with quick measurements such as weight and BMI, then the RunStar 4E won’t cause you any problems.

Getting into the specifics, musculoskeletal-related measurements using BIA include muscle, muscle mass, and skeletal muscle rates. The first two measured around a 3% deviation from the 8E SmartScan Pro, but it was the skeletal muscle rate which was most concerning, measuring a deviation of nearly 15%.

Unfortunately variable results continue with fat-related metrics. Compared to the SmartScan Pro, body fat percentage, subcutaneous fat, and body fat mass all reported a massive 30% deviation.

Despite comparably poor results on some metrics, it’s worth remembering that most of these are specialized measurements, and to expect too much from a smart scale that costs $33.54 / £31.00 might be a little unreasonable.

That said, it would be preferable for consumers if smart scale manufacturers would only include metrics that they could report on accurately. The RunStar 4E also measures consistently with itself, which means it can still be trusted as a weight loss tool assuming you allow for the margin of error.

• Performance score: 3.5/5

RunStar 4E Body Scale: Scorecard

RunStar 4E Body Scale: Should I buy?

Buy it if...

Don't buy it if...

Also consider

How I tested

My family (two adults and three children) has been using the RunStar 4E for three months. We’ve used it to measure and track all types of metrics, including weight, BMI, and muscle mass. I carried out comparison tests with the more premium RunStar 8E SmartScan Pro. In addition, I’ve used every feature of the app to give the smart scales a thorough testing.

First reviewed: July 2026

The news that Amazon’s smarter AI assistant, Alexa+, is finally making its way to Australia could well be exciting news for many Aussies. After all, we’ve had to wait a fair amount of time for the upgraded digital assistant, as it launched in the US way back in February 2025, and arrived on UK shores in March of this year.

If you’re already embedded in Amazon’s ecosystem, whether that be through ownership of Echo smart speakers and displays or Ring home security cameras, you’d be forgiven for thinking Alexa+ might never make it Down Under. If so, you may have never felt the need to upgrade your various Amazon devices to newer generations.

Now with the official rollout of Alexa+ in Australia, that could mean your devices aren’t compatible. In truth, the list of incompatible devices is relatively short (which I have to say is quite remarkable and deserves brownie points for Amazon), but regardless, the latest generation Alexa-enabled devices will offer the best Alexa+ experience.

So, if you want to add Alexa+ to your home to become an AI-powered digital assistant capable of performing all manner of tasks, from answering simple queries to placing Amazon orders on your behalf or even notifying you when packages are delivered to your home (and are captured on a Ring camera), then any of these nine Echo devices will be worthy additions to your home.

Also note that you'll need a subscription to Alexa+. It's free if you're already a Prime member, otherwise it costs AU$29.99p/m. Considering an Amazon Prime membership is just AU$9.99p/m, you'd be saving money.

• Amazon touts Alexa+ as its voice assistant’s “biggest leap forward”
• Aussies can now request early access to Alexa+, but it’s also available with the purchase of a new eligible Echo or Fire TV device
• Prime members get Alexa+ for free after early access ends in November; non-members pay AU$29.99p/m

Alexa+, the conversational AI upgrade of Amazon’s long-time voice assistant, has officially launched in Australia, over a year after rolling out in the US.

This “smarter, more conversational and more capable” voice assistant promises a more transactional experience that recognises natural language, can remember user preferences and automatically adjust your smart home tech, like turning on your air conditioning when it starts to get warm or turning on lights when it starts getting dark.

For its local debut, Amazon has added Aussie touches, so Alexa can now understand colloquialisms like ‘arvo’, ‘snags’ and ‘servo’, as well as being “tuned into Australian culture”, like not mixing up footy codes or understanding expressions like ‘fair dinkum’ or ‘passing the pub test’.

You can sign up for an early access invite now if you already own a compatible device, or get automatically signed up when you buy an eligible Echo or Fire TV device — check out our nine favourite Echo devices to get you up and running. After early access ends on November 30, 2026, Alexa+ will remain a free Prime benefit for subscribers, while non-members will have to pay AU$29.99 per month to retain access.

Most of the current Echo devices are compatible with Alexa+, with only the now-discontinued first- and second-generation models unable to support the new voice assistant. Fire TV devices, meanwhile, will have limited compatibility with Alexa+, with support available only on the following:

• Fire TV Stick 4K Select
• Fire TV Stick 4K Max (2nd Gen)
• Fire TV Stick 4K Plus (2nd Gen)
• Fire TV Cube (3rd Gen)

Alexa+ isn’t the only ‘smart’ voice assistant available in Australia, with Google Home Premium (formerly Nest Aware) being its main competitor. The latter costs AU$15 per month or AU$150 per year for its Standard tier, or AU$30 or AU$300 per year for the Advanced tier, scoring Alexa+ points on pricing — provided you’re a Prime member or course.

It remains to be seen whether this would trigger a Prime membership price hike in the days to come.

Do we really need an Amazon-powered LLM in our lives?

Amazon claims that Aussies interact with Alexa “more than two billion times each year”, with 77 million questions asked and more than 600 million smart home actions in 2025 alone. While that suggests there’s a large customer base in Australia, it begs the question of whether we’re willing to bring another AI assistant into our homes and, importantly, pay extra for it.

As my colleague Graham Barlow rightly pointed out, Alexa+ may be an improvement by being more conversational and context aware, but it doesn’t really do enough to warrant the consistent use of the assistant.

Lots of Redditors have also expressed their displeasure with Alexa+, with some choosing to revert back to the old Alexa for the many ads, the style of the new voices, or just preferring not to opt into the upgrade.

Sure, being a free add-on to Amazon Prime will see plenty of early adopters, but it remains to be seen if Aussies will jump ship from ChatGPT, Gemini, Claude or whatever LLM they’re already using and move to Alexa+. (Incidentally, a web version is also slated to come soon.)

Then again, AI is evolving and Alexa+ seems like the next step in the voice assistant’s development, although it will need to do more than just speak fluent 'Strayan if it wants to reign supreme Down Under.

• Philips Hue accidentally leaked a new Pro TV lightstrip on its own website
• There are no details of its price or release date yet
• A new Philips Hue Play Sync camera is expected to launch soon

I love Philips Hue lights, and I particularly love Hue lightstrips — so I'm excited by an accidental leak that indicates a new Pro lightstrip is coming to your TV.

The leak was spotted by the excellent Hueblog, who discovered the following text on the US Hue website: "Check out Philips Hue Play gradient strip lights and Play gradient strip light pro." There isn't currently a gradient strip with the 'pro' suffix, so this appears to be a new product that's coming very soon.

I hope so, although I worry about the "pro" bit because that usually indicates a premium price. But if it uses the same tech as the spectacular Hue Omniglow lighting strip I reviewed earlier this year, it could be a stunning addition to your home cinema or gaming setup.

Philips Hue Play Gradient Strip Light Pro: what to expect

The Philips Hue Play system synchronizes your smart lights and bulbs, enabling you to change the lighting with music or to reflect what's going on in a game, TV show or movie. The Gradient Strip Light models are designed to go on the back of your TV and deliver a similar experience to an Ambilight TV, extending the colours from your screen onto the walls and ceiling.

I'm a huge fan of Hue Play – I've been using it since the first-gen Play Sync box was released in 2019 – but the individual LEDs are very visible. If the Pro version were to be closer to the Omniglow, which delivers seamless gradients without the LEDs being visible individually, that would be a great upgrade. Although I suspect it's likely to be pricey too: the Omniglow has an RRP of $139.99 / £119.99 / AU$279.99 for the 3m model.

At the moment details are non-existent, but we do know that Hue is getting some more Hue Play products imminently: the Hue Play Screen Sync TV camera is expected to launch very soon as a more affordable alternative to the clever but expensive Hue Play HDMI Sync Box 8K. As with the Sync Box it'll mirror your display to your smart lights and bulbs, but you won't need to connect any devices to do it as it'll simply watch what's on the TV.

Xiaomi Robot Vacuum X20 Max review: one-minute review

The Xiaomi Robot Vacuum X20 Max seems like a slam dunk in the robot vacuum space. Positioned right in between the budget and upper mid range sections of the market, it delivers strong vacuum and mopping performance that make it capable of tackling a wide variety of messes in your home.

With LiDAR technology, its mapping is excellent and the robot vacuum does a great job of navigating unexpected obstacles that it might encounter during a clean. The design isn't the most exciting, though it still has a good range of features like an extendable mop arm and automatic carpet detection.

The dock is large, which might make it tricky to fit into smaller homes, but it's pretty capable as well, with hot water washing and air drying capabilities to keep the mop pads clean between uses.

It's all underpinned by a competent app that's easy to use and offers key functions such as being able to schedule cleans, restricting the robot vacuum to certain rooms, and allowing you to customize the vacuuming power and amount of water used by the mop.

The elephant in the room is that my unit developed a fault after a year of testing, occasionally spilling water during a mop pad clean. It's unfortunate and, even though it doesn't seem widespread, makes this model difficult to recommend unreservedly.

Xiaomi Robot Vacuum X20 Max review: price, range & availability

• List price $999.99 / £499.99 / AU$1,199
• Launched late 2024
• No longer available in Australia
• Limited stock in the US

The Xiaomi Robot Vacuum X20 Max has a list price of $999.99 / £499.99 / AU$1,199, and is readily available via the brand’s website in the UK. It often receives discounts too, taking the price down by £100 or so around major sales events. At this price it sits neatly between the budget and upper mid range price brackets, coming in much more expensive than under $300 / £300 / AU$500 favorites like the Roborock Q7 M5 but cheaper than the likes of the Eufy X10 Pro Omni, which goes for $799.99 / £799 / AU$1,699.95.

That latter model is a good point of comparison here, as it also features mop and similar LiDAR sensor setup. With this in mind, the Xiaomi Robot Vacuum X20 Max is very solid value - especially if you get it at that reduced price point. Accessories like replacement brushes, dust bags, and mop pads are all available via the Xiaomi website at pretty reasonable prices too.

Unfortunately, this model seems a lot harder to come by in the US. You can find it on Amazon, but it goes for an eye-watering $999.99 and stock appears limited. At this price it’s significantly worse value and you would be better off spending less on an alternative. Its list price is AU$1,199 in Australia, but it appears to no longer be available either through Xiaomi's own store, or Amazon.

• Value for money score: 3/5

Xiaomi Robot Vacuum X20 Max specs

Xiaomi Robot Vacuum X20 Max: design

• Raised LiDAR puck
• Extendable mop arm

The Xiaomi Robot Vacuum X20 Max isn’t pushing any boundaries when it comes to its overall design, but honestly that’s not such a bad thing.

It looks like your average robot vacuum, which is to say a big plastic disc with a chunky bumper at the front and a whole host of sensors. The most prominent of these is a big LiDAR sensor that sits in a little raised puck on the top, though there are others designed to spot obstacles or prevent the vacuum from falling off ledges.

Despite the basic look, the Xiaomi Robot Vacuum X20 Max has a bunch of useful features including two mop pads, one of which can be extended on a little arm for edge cleaning. The Xiaomi Robot Vacuum X20 Max is also capable of detecting which kind of surface it’s on, raising the mop pads when it goes over carpet to prevent any accidental stains.

Coming in at13.39 x 16.54 x 22.17 inches / 340 x 420 x 563mm, the docking station that it comes with is absolutely ginormous which could make it awkward to fit in smaller homes, but there are some good reasons for this size. Firstly, you’re getting a large 135.3oz / 4l clean water tank (removed for filling by simply popping up the lid on top of the dock) and a slightly smaller but still sizable 128.5oz / 3.8l tank for dirty water storage.

Xiaomi says that this is more than enough water to clean 2,152.8 square feet / 200 square meters on a single fill, and while my testing area was considerably smaller, I can say that it didn’t need refilling across multiple cleans.

The dock also has a hot water system to help wash both mop pads at 131F / 55C - a temperature that Xiaomi claims reduces odours more effectively. It dries the mop pads using hot air, a process that takes a few hours and produces a small level of sound akin to a desk fan.

There’s also a generous 84.5oz / 2.5l dust bag, which Xiaomi says only needs emptying once every 75 days in a three-person household with one pet. This seems like a very generous estimate to me, and your mileage will vary depending on your specific level of household mess. This bag size is on par with much of the competition, such as the aforementioned Eufy X10 Pro Omni, so you can expect similar performance to those models.

One feature that I particularly appreciate is the ability to remove parts of the dock for cleaning, including the little tray where the vacuum sits while charging. This isn't something that you will need to do regularly, but my previous robot vacuum tracked a decent layer of grime in its dock over the years and was comparatively pretty tricky to clean.

My only real complaint from a design standpoint is the vacuum’s incessant need to narrate what it's doing. By default it frequently declares 'start to dry the mop pad' and similar phrases in a loud, annoying voice. It's disruptive, though mercifully can be turned off in the app.

• Design score: 4/5

Xiaomi Robot Vacuum X20 Max review: performance

• Good navigation
• Deals with multiple surfaces well
• Base station pump developed issues

I've been using the Xiaomi Robot Vacuum X20 Max for a year now, and can say that it handles most daily cleaning tasks well. Its navigation capabilities are excellent and map that it generated of my cleaning area was spot on. I have the base station in the corner of an L-shape hallway and the robot never struggles to find it, even when it's been cleaning the handful of adjoining rooms.

Setting room boundaries works excellently too — if you want to restrict cleaning to a specific defined area, the vacuum won't stray beyond it. It also deals with unexpected obstacles like closed doors or moved furniture well, bumping into them once or twice and then adapting its path smartly. You don't need to worry about multiple surfaces, either. Every time I spot the vacuum going over the rug in the middle of a mop cycle, the pads are automatically raised as it detects the soft surface to prevent damage.

The vacuum picks up small debris and cleans up small spills with no sweat, and for a more intensive task I doused my kitchen floor with oats, cereal crumbs, flour, ketchup, and pretty much anything else that I could find in the cupboard.

How did the Xiaomi Robot Vacuum X20 Max fare? I sent it out on the most intensive possible cleaning mode and it made a commendable dent in the mess. The oats, crumbs, and flour were masterfully hoovered up with the exception of a few survivors in the hardest to reach corners of the room.

The ketchup was more of a challenge, and at first I was pretty worried that it wouldn't be able to overcome it: the mop pads smeared it in a thin layer over the middle of the floor at first but, sure enough, after multiple visits to the base station in order to clean itself and to refill its water tanks, it was all gone after a few runs. I did spot some red residue in the grouting between tiles, but this took just a few seconds for me to wipe up.

It's the kind of performance you would want from a mid-range robot vacuum. It's not a total replacement for doing the cleaning, but it does decrease the need for big cleans.

That said, my unit has developed a major issue over long-term testing. Sometimes when the vacuum cleans its own mop pads (either at the start or during a cleaning task) the motor that's meant to suck away all the dirty water doesn't kick in. This means that dirty water starts to accumulate in the base station, eventually overflowing and spilling out onto the floor.

It's frustrating (and pretty gross), and I'm struggling to resolve the issue by cleaning the water sensors, fiddling with the base station, and so on. Anecdotally, a family member bought Xiaomi Robot Vacuum X20 Max a few weeks after seeing my one, and it developed a similar fault within just a couple of months. It was, after some back and forth, repaired by Xiaomi.

Looking online, it doesn't seem to be a widespread problem, though I've still been able to find at least a few others who report the same thing. Users on Facebook and Reddit also seem to have had luck getting their vacuums replaced via Xiaomi's support service, though I suspect I can't go through this route with a review sample.

For this reason, I would recommend buying from Xiaomi directly rather than through reseller if you do chose to pick one up, as you otherwise will likely have more trouble getting support if issues do arise.

• Performance score: 2.5/5

Xiaomi Robot Vacuum X20 Max review: app

• Easy to use
• Scheduling features
• Different suction levels

The Xiaomi Robot Vacuum X20 is compatible with the Xiaomi Home app. It's easy to use and has plenty of features, including the ability to view the map generated by the robot, and its location real time. This is on top of the option to start cleans in specific rooms, schedule cleans, or clean the mop pads.

You can view the battery level, and change cleaning modes. These include basic vacuuming, mopping, vacuuming and mopping, or vacuuming before mopping. You can increase the water output too, with three levels to choose between, but bear in mind that this will increase how quickly you will need to refill everything.

I didn't encounter any bugs within the app, and it remained quick and responsive during my year of testing. The fact that you have to set up a Mi account is a bit annoying, but otherwise it offers everything you could from robot vacuum companion software.

• App score: 4.5/5

Should you buy the Xiaomi Robot Vacuum X20 Max?

Buy it if… 

Don’t buy it if… 

Xiaomi Robot Vacuum X20 Max review: alternatives to consider

How I tested the Xiaomi Robot Vacuum X20 Max

I tested the Xiaomi Robot Vacuum X20 Max in my home for over a year, using it to clean a hallway and two large rooms on a weekly basis. It cleaned a wide variety of messes in that time on a number of different surfaces, namely carpet and tiled flooring. I fully utilized the companion app in order to evaluate its performance and compared the overall experience to other robot vacuums that I own.

Read more about how we test

First reviewed August 2026

• Existing ban on drones and routers extended to "advanced" robots
• FCC has confirmed that robot vacuums are included
• No effect on products already authorized by the FCC for US sales

The US's latest ban on foreign hardware is coming for an unlikely target: robot vacuum cleaners and likely robot lawn mowers too.

The ban comes via the White House, which has extended its previous ban on foreign-made drones and Wi-Fi routers. The ban now includes foreign-made power inverters and "advanced robots" on the grounds that they pose a national security risk to the US.

If you're finding it hard to imagine Russia rigging your vacuum cleaner, or Iran invading the US via an army of lawnbots... yeah. Us too.

How will the ban on robot vacuum cleaners work?

The ban doesn't outlaw the use of robots that you already own, so you're not going to have to hand over your robo-vac to the authorities. However, it bans the sale of "advanced robotic devices".

The definition of advanced robotic devices refers specifically to "autonomous mobile robots, humanoid robots, and quadrupeds" that can move around, avoid obstacles and weigh 4.4lbs or more including any ground station or docking station. Many robot vacuums and lawn mowers meet those criteria, and the FCC has confirmed to PC Mag that the ban does indeed apply to cleaning robots.

This is bad news for the big robot brands such as Ecovacs, Roborock and Dreame; the top five US robot vacuum brands are all Chinese, and therefore fall under this ban, so we contacted them for comment.

"We are aware of the FCC’s recent update," Eric Villines, Chief Communications Officer at Anker Innovations (the parent company of Eufy), told TechRadar. "Based on our current understanding, the new rule does not affect the continued availability, use or support of products we currently sell in the United States. Those products remain available and will continue to receive updates and customer support,

"Like others across the industry, we are seeking further clarity on how the rule will be applied to future products, and we will keep our customers informed. We remain committed to complying with all regulatory requirements in every market where we operate."

Several other smart home brands declined to comment at this early stage, but we get the general impression that this news might have come as something of a surprise.

Can you keep using your robovac?

There is one bit of sunshine in this cloud, however: the ban is not retrospective, so if a robot already has FCC authorization to be sold in the US that's fine. The ban does not prevent retailers "from continuing to sell, import, or market relevant models approved previously."

That said, PC Mag identifies a separate FCC order that says existing robot vacuums and similar products "may continue to receive software and firmware updates that mitigate harm to US consumers at least until January 1, 2029." If the FCC decides not to extend that then it's just put a countdown clock on any new Chinese-made robot vacuums sold in the US.

For the affected manufacturers, the next step will be to lobby the FCC in the hope of gaining an exemption for some or all of their products: after all, there's a big difference between a self-driving, self-cleaning mop and a robot dog capable of carrying an AR-15. However, so far there haven't been any exemptions for major Chinese drone or router manufacturers so the future is not looking very bright for the affected companies.

Thinking of buying a new TV?

Try our TV size and model finder! You tell it how far you sit from your TV, we'll tell you what size to buy based on viewing angle advice from image quality experts, and we'll recommend our three top TVs at that size for different prices.

Robot lawn mowers are emerging as one of the most exciting smart-home categories. The concept has been around for a while, but in the past two years we've seen advances in technology that are making them more helpful and more user-friendly than ever. Finally, the barriers to entry are coming down, and lawnbots are starting to look like a feasible option for even the least tech-minded amongst us.

To find out more about what's going on in this growing space, I spoke to KK Yin, marketing director at major lawnbot brand Mammotion. We chatted about the most impactful shifts in lawnbot technology, the hottest trends, and the hurdles the industry still needs to overcome.

Cutting-edge edge cutting

For KK, the big feature that hasn't quite been nailed yet is edge-cutting. Even if you have a great robot mower that does a stellar job trimming your grass, its usefulness is limited if you then have to get out a trimmer to take care of the edges. "Edge trimming remains one of the biggest challenges, especially along walls," says KK. "The key is balancing cutting performance with safety."

If you're trimming along the edge of a flat path, it's relatively easy — certain mowers are designed to straddle the path edge, with the blades underneath trimming the grass at the boundary line. However, that doesn't work when trying to trim next to a wall. "The lawnmower can get as close as possible, but the cutting disc being set back from the mower's edge to maintain a safe clearance prevents the mower from cutting close enough to walls," KK continues.

Lots of brands have been working on a solution, and it typically takes the form of an edge-trimming module that attaches to the side of the bot, with smaller blades in a protective casing.

On the Luba Mini is an edge-cutting disc that can trim as close as 5cm (1.97 inches) from a wall — a distance KK admits might not be close enough. "Five centimeters is not very far from the wall, but still some users want us to make it perfect so it can cut maybe even down to one centimeter," KK says.

"We're exploring more flexible solutions," he continues. "For example, when mowing alongside a wall, the cutting disc could potentially extend slightly out of the mower's body for a cleaner edge cut. In open areas or during ride-on-the-edge mowing, it would retract to maintain a safe clearance beneath the mower. So that is the direction and also the challenge in the future."

Tackling tricky terrain

Another major lawnbot trend that's been emerging over the past year or so is all-wheel drive (AWD). This helps lawnbots tackle tricky or uneven terrain, as having all the wheels individually powered means that if one or two end up off the ground, or struggling to get traction, the others can help the robot escape without requiring manual intervention.

AWD can also help the lawnbot retain its grip when scaling especially steep lawns. KK notes that in the European market, and Germany especially, lots of houses stand on slopes, where this boosted climbing ability comes in handy.

All-wheel drive is usually indicated by an 'AWD' on the product's name, and it appears in Mammotion's advanced Luba line — you can see the LUBA 3 AWD scaling an astroturf mountain in the video above.

The brand has also been looking at upgrading its bots' climbing ability and mowing speed, and is keen to figure out what the next advancement might look like. "We can see some other companies are exploring other things like independent steering," says KK. "Maybe that is a good solution for difficult terrain. So we are also thinking about how to combine this technology."

Better tech in smaller bots

Initially, Mammotion kicked off its lawnbot journey with its premium Luba series. Later on, the Yuka Mini arrived — a smaller, more affordable bot that's designed for yards 500 to 800 square meters in size. It proved to be the big winner in Europe during the recent Amazon Prime Day sales.

"I think when we started, our premium product line helped us build trust in our technology — things like the all-wheel drive and the positioning system and the efficiency. So customers believed our brand could bring some of that technology to an entry-level lawnmower," muses KK.

The Yuka Mini is a good fit for European yards, which on average are 300 to 500 square meters in size. "Many robot lawnmower brands spend a lot and have a different product strategy for European regions, because many of the users have already accepted this innovative product for their lawn care. For example, they know about the positioning systems and how all-wheel drive compares with rear-wheel drive. They want their robot lawnmower to do more things — not only mowing, but also edge trimming."

In the US, where the average lawn size is much larger than in Europe, the focus is a little different. "I think most US users still prefer a ride-on or traditional lawnmower. I think they're still looking for an efficient robot mower that can cover their large lawn," says KK. "The US is at a different stage, and what customers require is different.

No-fuss installation

Navigation tech is perhaps the area that has moved on most quickly and has had the most impact on lawnbot usability. It was only a few years ago that boundary wires were required; now they're all but obsolete.

Initially, the technology to take over was RTK. This is satellite-based positioning, and it requires a separate RTK receiver to improve the accuracy of the satellite data. Not everyone wanted to set up a receiver in their yard, leading to a shift to centralized receivers that could serve massive areas at once. Mammotion calls this NetRTK.

Either way, the system relies on satellites, which means it has some limitations in yards where there is coverage from trees or buildings. Most recently, we've started to see LiDAR being used. This is the navigation approach used in robot vacuums, and just like with RTK, there are pros and cons when used in lawnbots. LiDAR works by bouncing light off objects to build up a picture of its surroundings, which is great when there are objects around but less useful in wide, open spaces with nothing to bounce off.

"You know, like we always say, maybe laziness is the best way to improve the technology!" says KK. "For our users, if they're happy with the intelligence of the robot lawnmower, then they want an easier installation, or even no installation at all. So that's why they really like our NetRTK, because they don't need to install an antenna. Or some users will choose LiDAR, which doesn't need an antenna at all."

The real shift is less to do with using one specific navigation approach over another, and more about moving to a situation where multiple navigation technologies can work alongside one another.

"We want to think about the final result of the positioning system," says KK. "Many users don't want to compare which positioning method is good. They just use it; that's enough. They don't need to know more about it. So that's why we came up with Tri-Fusion, which combines the advantages of RTK and LiDAR and even AI vision. We believe this can cover all environments for a residential user."

A few robot mower companies have started experimenting with similar concepts, where the bot can swap between different approaches depending on the situation. If satellite signal drops out under some trees, LiDAR can swoop in to save the day and get the lawnbot back on track, for instance. Cameras (often backed by AI) form the third pillar, enabling the bot to recognize objects and understand if it should mow close to them or steer clear.

There are problems still to solve in the world of robot mowers, but let's not forget that just a few short years ago, we were still painstakingly laying boundary wires and watching the lawnbot bounce haphazardly between them. Now, the issue is whether a bot can trim quite close enough to the edge of a wall, and if it's smart enough to tell a soccer ball from a lounger. We've come a long way.

Brilliant bots

We've tested plenty of impressive lawnbots at TechRadar. Here's a taster of some of our favorites — hit the View details button for a link to our full review for each.

The world of robot vacuums has come a long way. I've been testing and writing about these puck-shaped home helpers for over two years, and during that time I've watched suction specs skyrocket, bots sprout legs and pincer arms, and docks transform into formidable, self-sufficient cleaning stations. Robot vacuums are looking cleverer and more useful than ever.

I wanted to get an idea of where the industry is headed, and what the next generation of robovacs might look like. So I rounded up representatives from some of the best robot vacuum brands to get their insights — and it's clear from what they told me that this smart-home segment is going to get even bigger… and even weirder.

• Update: After this article was published, it was announced that the FFC would be banning robot vacuums made outside of the US. Read the full story here.

Complete cleaners

The obvious place to start is with the cleaning itself, and there's one point that my interviewees all agreed on: it's no longer all about the suction specs. "Customers are looking beyond headline suction figures and realizing the performance of robot vacuums is the combination of a lot of features," says Michael Meng, President of Dreame's robot vacuum division.

Nowadays, customers are looking for better cleaning, rather than just outright power, and robovac brands have been happy to oblige, with all manner of inventive solutions.

Roborock, for example, has been working hard to make sure no corner goes uncleaned. "We see a massive push for ultra-slim designs that don't sacrifice power," says Ricky Ma, general manager for Europe and America. "People want a device that can finally clean the forgotten spaces under low-profile furniture — couches, beds, and cabinets — where dust and allergens traditionally accumulate and remain out of reach for bulkier robots."

The brand's newest bots use an innovative navigation system that doesn't require a raised puck to sit on the top surface. Roborock — alongside Dreame — has also experimented with pucks that can extend or retract, periscope-style, depending on the vertical height available.

Mopping functions have been the subject of much attention, too. Wet cleaning is nothing new — in fact, these days you might struggle to find a model that can't mop — but I've been seeing an increasing preference for roller mops rather than flat mop pads (either of the D-shaped or disc-shaped variety). The benefit of a cylindrical mop is that the dirty water can be scraped off, and clean water added in, as the robovac goes about its mopping business.

"One development that particularly excites me is the introduction of roller mop technology, which helps ensure floors are continuously cleaned with a fresh mop surface," says Reena Patel,

Floorcare Category Manager at iRobot, the brand behind Roomba.

Faraz Mehdi, managing director at Eufy, agrees. "Users increasingly care about whether the robot is actually cleaning with a clean mop and truly removing dirty water, rather than just spreading mess around," he says. "Real-time self-cleaning mopping makes a meaningful difference."

Eufy is also looking into improving filtration. In manual vacuums, Dyson has popularized multi-step filtration systems, which make use of cyclones to separate waste particles of different sizes. However, that hasn't really carried over into robot vacuums, which typically have a much more basic setup.

Eufy's AeroTurbo filter setup is significantly more complex. "We’re interested in airflow and dust-separation systems that help deliver more sustained suction performance, especially in homes with carpets and hair," explains Faraz. "One of the biggest pain points in the category is that cleaning performance can fall over time as filters clog, so technologies like multi-cyclone separation matter because they improve long-term consistency."

Dreame has made particular strides in innovations focused on getting right into edges and corners. "No matter how powerful a robot vacuum is, dust and debris collect in corners and along edges where brushes simply can't reach. It's one of those problems that sounds minor until you actually look at how dirty those corners get," says Michael Meng.

Its newest bot — the X60 Pro Ultra Complete — has 'UltraExtend technology', which enables the mop pad to kick out up to 7 inches / 18cm from the robot body, and the side sweeper brush to unfurl, E.T.-style, to reach up to 4.7 inches / 12cm.

The design is inspired by human limbs. "When you extend your forearm, your reach increases significantly," Meng explains. "We applied that same principle to our robotic arm design — engineering it to fold and unfold in a way that mimics natural arm movement."

Intertwined with cleaning performance is battery function. "A robot vacuum that runs out of power mid-clean is more frustration than solution," says Meng. "Consumers with larger homes or open-plan layouts need a robot that can complete a full clean in a single charge — or intelligently return to dock, recharge and resume exactly where it left off. Battery efficiency, combined with smart charging and resume functionality, has become a key purchasing consideration for households of all sizes."

Mind the (performance) gap

Even with all the performance advancements, it's still the case that a robot vacuum-mop won't clean as well as a manual vacuum could. Robovacs are winning on convenience, but not on cleaning power. The long-term aim is to catch up. "The first step is to close the cleaning performance gap — reaching, and eventually surpassing, handheld devices," says Faraz from Eufy.

Longer-term, he sees things progressing to a point where robot vacuums can tackle not just vacuuming and straightforward mopping, but a wider range of cleaning demands.

"Technologies like roller mopping, steam cleaning, and multi-cyclone systems are maturing," he points out. "In the next five to 10 years, robot vacuums will take on true deep-cleaning capabilities — thorough carpet washing, high-temperature steam disinfection and floor sanitization. The kinds of tasks that currently require dedicated equipment or professional services will gradually fall within the robot vacuum remit."

The trump card robot vacuums already hold over manual cleaning appliances is that they take care of the job on their own. It makes sense, then, that continuing to improve automation is a key focus for all the brands I spoke to.

"In the 12 years we have existed as a company, trends have shifted constantly," says Roborock's Ricky Ma. "Currently, the primary trend is 'zero-maintenance and zero human intervention', where users expect a robot to not only vacuum and mop but also self-clean, self-dry, and navigate complex environments without human intervention."

"The biggest challenge is making advanced automation feel completely effortless," adds SwitchBot's co-founder Richard Mou. "Our goal is to reduce the number of times users need to think about their robot."

iRobot's Reena Patel points out that this focus on autonomy is reflected in iRobot's sales patterns. "We've seen consumers become more willing to purchase premium robot vacuums to deliver a genuinely hands-off experience," she tells me. "Consumers are increasingly prioritizing features that save time, such as self-emptying and self-cleaning docks, advanced mopping systems, and intelligent obstacle avoidance."

A big part of the equation when it comes to true autonomy is maintenance. "People increasingly expect higher automation," says Eufy's Faraz Mehdi. "Features like auto-emptying, mop washing, drying, and anti-tangle systems are becoming much more important because users want a robot that genuinely reduces housework, rather than creating a new maintenance routine."

The ultimate aim is robovacs that don't require you to get involved at all — as Mehdi puts it, "zero manual intervention, end to end", including "full-chain self-maintenance, so the user never needs to maintain the machine itself."

Self-maintenance is one thing, but for a robot to operate without a human chaperone present, it also needs reliable navigation and object avoidance skills. These are essential if it's not going to get lost, stuck or tangled in something.

"Accurate navigation is the foundation of an effective robot vacuum," says Dreame's Michael Meng. "Advanced LiDAR and AI-powered object recognition allow modern robots to avoid obstacles in real time.... Smart robots should not be trapped or stuck easily, so they can work on their own without users to rescue them."

I've never met a robot vacuum that's not desperate to jam itself up by chowing down on any charge cable it can get its wheels on, so here I'd like to put in a personal appeal for more focus on low-level object avoidance.

Time to step up

When it comes to robot vacuums making their way around unassisted, the ultimate hurdle to overcome is stairs. The more premium of the current fleet of bots tend to come kitted out with something akin to small stilts, which raise up the body of the vacuum and enable it to maneuver over tall room thresholds.

However, traversing an actual flight of stairs requires an altogether more involved approach. "It sounds like a simple problem, but for anyone living in a multi-story home, it's one of the biggest limitations of robot vacuums today," Meng notes.

As far as I'm aware, there are just three brands who have offered some kind of stair climbing solution, and they're all represented in my pack of interviewees. For Dreame, it's the Cyber X — essentially a stair-climbing pocket into which a robot vacuum can dock when it needs to change floors. Think of it like a stairlift for robovacs. Eufy's MarsWalker takes a similar approach.

Roborock's Saros Rover is rather different, with its two long, spindly legs that enable it to scale not just steps but all kinds of uneven terrain. Ricky Ma sees it as a major breakthrough in bots that don't require human intervention. "The future of this category is exciting and we can't wait to show everyone what we have to offer," he enthuses. I saw the Rover in action at CES 2026, and it was a complete departure from any robot vacuum I've seen before. At that point, it was still at prototype stage — I'll be watching with interest to see how things develop.

Future-gazing

So far, I've been focusing on developments that have already started to take root. But what about the longer term? I asked my interviewees their predictions for what the robovac market might look like in five to 10 years' time, and they had some intriguing answers.

Eufy believes autonomous decision-making is going to change the game. "Robot vacuums will reach a level of intelligence where they can genuinely understand the home environment, identify different types of dirt, and autonomously choose the optimal cleaning strategy," Faraz Mehdi predicts.

Roborock is planning along similar lines. "Robovacs are rapidly shifting from an appliance to a smart cleaning partner. The most important shift will be greater physical intelligence," says Ricky Ma. "The ultimate goal is to build an intelligent cleaning partner that can spot the need to clean even before the user has time to ask the product to do so."

Further to this, a few of the execs I interviewed envision about a future where robot vacuums are no longer lone rangers, but work seamlessly alongside other smart appliances.

"Rather than operating as standalone devices, they will become increasingly connected with the wider smart home ecosystem, working more intelligently with other devices," says Dreame's Michael Meng.

Meng also sees a future where robovacs are far from the only autonomous helpers in the home. "While the familiar robot vacuum will remain an important form factor, its capabilities will extend well beyond floor cleaning," he says. "Advances in technologies such as robotic manipulation and embodied AI will enable these robots to interact more naturally with their surroundings and take on a broader range of household tasks."

SwitchBot's Richard Mou has an even more fully formed vision for the future: "I think we'll stop thinking about robovacs as a standalone category and instead see them as part of a broader family of home robots," he tells me.

"As embodied AI and humanoid robotics continue to mature, robot vacuums will contribute proven capabilities like autonomous navigation, environmental perception, and home mapping, while future humanoid robots build on those foundations to take on a much wider range of household tasks. At SwitchBot, that's exactly how we see the future — creating intelligent home robots that work together as one ecosystem rather than isolated devices."

Prepare yourself for the home robot takeover — and for an even cleaner home.

TP-Link Tapo C660 Kit: One-minute review

The TP-Link Tapo C660 Kit is a feature-packed 4K outdoor security camera that delivers many of the perks usually reserved for pricier models, including solar charging, pan-and-tilt coverage, color night vision and local microSD storage.

That last feature means you won’t need to pay for a subscription for video playback and download, but there are still some great (but non-essential) features in the paid Tapocare subscription, especially if you plan to expand your home's security with more than a single camera.

The Tapo app is also easy to use, and the C660 Kit will slot in alongside other Tapo smart home gear like lights, plugs and more to form its own smart home ecosystem. On the other hand, if you have other smart devices in the mix and would prefer a hub to control them all, Alexa has the strongest support, while Google Home only works with voice commands and video streaming to smart displays and TVs. There’s no native support for Apple HomeKit.

While it doesn't necessarily stand out in a crowded market with its design, the white casing looks sleek and stylish, and the IP65 waterproof rating means the C660 Kit is dust-tight and can withstand low-pressure water jets from any direction (aka rain, splashes or hose spray).

TP-Link Tapo C660 Kit review: Price and availability

• Starts at $169.99 / £179.99 / AU$299 for a single camera unit
• Available in multipacks of 2, 3 and 4-camera bundles
• Optional Tapocare subscription plans start at $3.49 / £2.99 / AU$3.99 per month

The Tapo C660 Kit costs $169.99 / £179.99 / AU$299 for a single camera unit, although multipacks of 2-, 3- and 4-camera kits are available either as set bundles or as part of a build-your-own package option directly from Tapo as well as through third-party retailers like Amazon.

While you may not need a subscription package, especially if you use a single camera unit, Tapocare might well be worthwhile for some users. It offers cloud storage, extended video clip history for up to 30 days and enhanced notifications, with plans starting at $3.49 / £2.99 / AU$3.99 per month for one camera on the Basic Tapocare tier. Prices increase as you add more cameras.

You can also buy the camera on its own without the solar panel under the TP-Link Tapo C560WS name for $99.99 / £109.99 / AU$199.

• Value: 5/5

TP-Link Tapo C660 Kit review: Specs

TP-Link Tapo C660 Kit review: Design and installation

• Sleek black and white color scheme
• Straightforward installation with easy-to-follow instructions
• Recommended mounting height is between 2.5m and 3m (8-10 feet)

The Tapo C660 Kit has a sleek white plastic body with black accents around the lens, with IP65 rating for dust ingress protection and resistance to low-pressure water jets from any direction. This means water from rain, splashes or hose spray will be fine, but it won’t withstand immersion and pressure washing.

The solar panel is just the right size relative to the camera — it isn’t small and subtle by any means and it’s definitely noticeable once installed, but it isn’t too imposing either. As mentioned above, there is a rubber flap underneath the camera lens concealing the power button, a reset button and a microSD card slot.

Installing the Tapo C660 Kit is straightforward thanks to the easy-to-follow instructions included in the box. You start by drilling holes where you want to mount the base plate, then slot the camera in. The solar panel is screwed on top, then plugged into the camera’s USB-C port located on the bottom.

It’s worth taking some time to think about where you want the camera placed before you install it, though. While the Tapo C660 Kit can pan and tilt the camera, getting the full view of an entire space isn’t guaranteed if it’s mounted too low since it doesn’t tilt upward. TP-Link recommends mounting it between 2.5m and 3m (8-10 feet) and in a location where the solar panel gets the most sunlight throughout the year.

TP-Link also recommends that the camera shouldn’t point at swaying trees and other moving objects like vehicles and pedestrians to prevent an avalanche of notifications, but if it’s unavoidable, the C660 lets you set motion detection zones via the app to reduce or minimize notifications of movement within those zones.

One thing to note about the installation is that the camera has a manual power button tucked away beneath a flap under the lens. Unlike other security cameras that power up automatically when plugged into a power source (like the solar panel or a USB-C cable), this button needs to be switched on before mounting (especially when it's in a hard-to-reach height) and pairing with the Tapo app.

Pairing the camera to the app is quick and straightforward, with only a few setup options at the beginning, like Wi-Fi connection type (2.4GHz for longer range or 5GHz for better video streaming quality, both using the Wi-Fi 4 standard), assigning the camera’s location and even the icon you want displayed in the Tapo app home screen.

• Design: 5/5

TP-Link Tapo C660 Kit review: Software and smart home support

• Tapo app is intuitive and easy to use
• Alexa has full support, while Google Home is limited
• Motion detection zones move with the camera instead of a fixed area

TP-Link’s Tapo C660 Kit natively integrates with the Tapo smart home app, allowing the camera to slot into any existing Tapo smart home ecosystem that might include lights, plugs, switches, robot vacuums, door locks and more.

If you have devices from other brands and use a smart assistant to consolidate them into one interface, the camera supports Amazon Alexa and Google Home. Alexa supports both live footage playback and voice commands, while Google Home only supports voice controls and video streaming on select devices. Apple HomeKit isn’t supported, but alerts and automations can still be done through Siri via iOS shortcuts enabled through the Tapo app.

The app works well, with an intuitive interface using tiles to show all your Tapo devices, with dedicated tabs for the different gadget categories (like cameras, vacuums and 'Smart' for automations). You can play the live feed and adjust settings by tapping on the tile for the camera (or cameras if you have more).

Camera settings include two-way audio, a toggle for the built-in spotlight and adjustments for panning and tilting the camera. There’s also an option to 'save' a set camera position via 'Viewpoints' and easily access those positions without manually adjusting each time. Those views can be used for automations, too.

To try out the feature, I set the camera to monitor the rear of the house instead of the driveway and front stairs for just a few hours during the day, and it would activate as scheduled each time. Patrol Mode also lets you move the camera between those set positions, but the Tapo app warns that this mode may impact the camera motor’s longevity.

One annoyance I found with the Viewpoints feature was that the motion detection zone that I set also moved with the camera and there’s no option to lock it to a specific spot. Thankfully, I didn’t have to move my camera too often for that to personally impact me, but I can see it being inconvenient for some users.

Adding to the motion tracking is a setting subject detection like person, pet or vehicle, and it can also be set for different motion detection zones as well.

• Software: 4/5

TP-Link Tapo C660 Kit review: Performance

• Crisp 4K image quality from 8MP lens
• Built-in spotlight provides color at night
• Solar panel keeps the unit running 24/7

The Tapo C660 Kit captures videos through its 8MP lens with 4K (3840 x 2160 pixels) resolution, with a frame rate of 15 or 20 frames per second. The recorded video clips were crisp and detailed when viewing live or when playing back previously recorded footage. It was clear enough for me to see details like faces, vehicle license plates and larger text from further away, while the 18x digital zoom provided more detail than lower-resolution cameras.

It managed to retain detail in brighter areas and the video wasn’t washed out, like when direct sunlight was hitting the driveway. There’s built-in wide dynamic range to prevent overexposure in bright sunlight or underexposure in dark shadows.

Motion tracking was responsive, and the C660 Kit could track me moving when I was walking quickly, running or cycling (although I wouldn’t necessarily call myself a fast runner or cyclist to try and avoid the tracking). I also liked that the camera automatically reverts to the original position after detecting movement, so I didn’t have to adjust it manually as some security cameras require you to do.

At night, the f/1.6 aperture takes in enough light to provide a clear image, and the built-in spotlight adds more low-light visibility. There’s also an infrared sensor as an alternative to color night vision. While I found both modes were able to detect movement almost instantly, the image quality isn’t as crisp as daytime mode, but it was still decent enough to be clear and fully visible.

The built-in microphone produced clear audio and was loud enough for a conversation even when I wasn't at home.

The solar panel kept the battery topped up, with the camera almost always running at 100% apart from some overcast days. It was only when I switched on 24/7 Capture (which frankly most people won’t need) that the solar panel struggled to keep the camera charged, and I eventually had to bring it indoors (it can be removed from its base plate easily) for a top-up via a USB-C cable.

In a different test, I tried running the camera without the solar panel plugged in, and the camera ran uninterrupted for just over 2 weeks before it needed charging.

The Tapo C660 Kit isn't necessarily the cheapest 4K security camera, but having local storage via a microSD card makes it a great value option compared to others that require a subscription to access cloud storage for recorded footage. It supports up to 512GB, though you'll need to purchase the microSD card separately as it doesn't come with one in the box.

TP-Link says that’s enough for around 16 complete days of recording, which is plenty for most people. Local storage means you can also back up those recordings to your home computer or another drive for redundancy. The Tapo app also lets you password-protect the microSD card for an extra layer of security.

Accessing footage from the card is easy through the app, and notifications reliably link to recordings with almost no delay after the camera detects motion. Video playback is also very smooth in the app. If you prefer cloud storage, you can opt for the aforementioned Tapocare subscription and choose a plan based on the number of connected cameras you plan to have.

Other features in Tapocare include 30 days of encrypted video storage for events, rich notifications and video summaries.

• Performance: 4/5

Should I buy the TP-Link Tapo C660 Kit?

Buy it if

Don't buy it if

How I tested the TP-Link Tapo C660 Kit

I installed the Tapo C660 Kit to a porch post on my property for a few months to get a sense of both its recording capabilities and whether its solar panel would keep the camera’s battery charged.

I tested all the settings, but had the alarm and spotlight mostly turned off to avoid disturbing neighbors, only doing one-off tests to see if they perform as advertized. I would also check captured footage whenever I got a push notification.

The smart home integrations were tested with smart displays (a 2nd-gen Google Nest Hub and an Amazon Echo Show 5) in addition to the Alexa and Google Home mobile apps.

First reviewed July 2026

• Google is expanding Gemini Live to the first-gen Home Mini speaker and Nest Hub smart display
• It rolled out in Gemini for Home early access, and requires a Google Home Premium subscription
• Google also increased Gemini's conversation memory window to 15 minutes

It’s a great day to be an owner of older Google smart home devices, now the company is rolling out Gemini Live to its two of its OG models.

Yesterday (July 23) Google unveiled a slew of Gemini for Home early access upgrades on its support page, but the one that has everyone talking is the arrival of Gemini Live, which is coming to the first-gen Google Home Mini speaker and Google Nest Hub smart display.

The update marks the next step in Google’s plan to expand the ubiquity of its live AI chatbot, which the company rolled out to the Nest Mini, Nest Audio, Nest Hub, and Nest Hub Max devices in October 2025. The new Google Home Speaker comes equipped with Gemini Live out of the box.

For users who are still going strong with their first-gen Google devices, we imagine this upgrade will be welcomed with open arms, but the one catch is that Gemini Live is paywalled behind the Google Home Premium subscription service, which costs a monthly fee of $10/ £8/ AU$15.

If you already have Google Home Premium and are part of the Gemini for Home early access program, you can now start conversations with your Home Mini and Nest Hub devices by saying ‘Hey Google, let’s chat’. The chime will indicate that Gemini is listening, and you can ask it anything such as recipe ideas, suggestions for an upcoming trip, or dive deeper into the most niche topics.

In addition to Gemini Live’s expansion, Google has upgraded Gemini’s conversation memory window to 15 minutes. “You can ask Gemini a follow-up question to a topic that was discussed during this window, and Gemini will understand the context,” the company details.

It’s refreshing to see that Google hasn’t completely given up on its early smart speakers and displays — even if the hardware is aging. Not often do you see tech giants acknowledge that old devices are still widely used, and Amazon is a classic example of this.

A few months back, the company came under fire for ending support for Kindles released from 2012 and earlier even though there’s a whole community of bookworms that still rely on these models — so Google is doing a better job than Amazon in that regard.

Signed up to Google Home Premium but unsure how to join the Gemini for Home early access program? We’ve got you covered.

First, you’re going to need to request early access, and you’ll need to make sure your Google Home app is updated to the latest version. From there, launch the app and tap your profile image or initial at the top right, select Home settings, and then Early Access. Follow the steps to request early access, and you’ll receive a notification when Gemini for Home becomes available for your devices.

You can also check region availability and other information on the Google Home and Nest help page.

I've been testing and writing about robot vacuums for nearly a decade here on TechRadar Australia and one of the standouts for me in the past 12 months was (if you'll excuse the pun) an absolute dream machine.

If you read my in-depth Dreame Aqua10 Ultra review, you'll know just how impressed I was with its overall performance, and my nitpicking complaints were mostly to do with how its battery gets used, which honestly isn't even a complaint — perhaps more of an observation.

It is, however, a premium model that I've only very rarely seen discounted. Its slightly cheaper sibling, the standard Dreame Aqua10 Roller, though, is almost as good and also currently 44% off on Amazon, and just AU$69.35 more than its Prime Day price from earlier this July.

That's still a sight better than having to pay nearly three grand for the Ultra version.

The differences between Aqua10 Roller and its Ultra sibling may seem like a long list, but trust someone who's still using the latter in her own home — it's overkill and not worth the extra cash.

So what are those differences? Well, for starters, the LiDAR turret doesn't lower itself automatically on the standard Roller version, but that's not unique to it, especially at this price. It also misses out on the 3D mapping that the Ultra version does but, again, a 2D map is pretty much all most people will need (floors, after all, tend to be pretty flat). And it gets a single-compartment soap dispenser instead of the dual-slot one in the Ultra which, again, isn't necessary unless you want to use an odour-neutralising solution as well.

For your money, you're still getting a whopping 30,000Pa of suction which, going by how well my Ultra version utilises it, will do very well on carpets and I am in awe at how well the roller mop works on the Dreame. There are plenty of intelligent features available on the Aqua10, including intelligent stain removal, so if you think your robovac has forgotten its navigation path and is circling, that's likely just its sensors picking up extra dirt in a small area and getting the bot to clean repeatedly for a thorough job.

It's also a machine that promises excellent edge cleaning, since it uses the exact same side brush and extending roller mop as the Ultra model. And the Roller even has the same automatic mop cover, which comes on as soon as it detects carpet to keep the mop head clean and your carpet dry.

While the Roller doesn't quite match the Ultra's ability to move over thresholds and steps up to 8cm tall, it's capacity to tackle heights up to 6cm is still above average, and means it can potentially head into patio areas if your sliding door frames aren't very high.

If it performs anywhere as well as my Ultra model, I think the Dreame Aqua10 Roller will be hard to beat at its current discounted price.

• Ring had launched an updated Outdoor Camera and Peephole Camera 2K
• They will both go on sale in August 2026
• The Outdoor Camera is £99.99 (about $130 / AU$190), and the Peephole Camera is £79.99 (about $110 / AU$150)

Ring has announced two brand new smart security cameras, one for mounting outdoors and one for installing into the peephole of your door.

Let's start with the outdoor option first. The new Ring Outdoor Camera (2nd Gen) is available in both wired and battery versions. It has a wide-angle lens (140 degrees horizontal and 85 degrees vertical), and delivers 2K resolution with up to 6x enhanced zoom. It has B&W night vision, customizable privacy zones and motion detection, and you can talk to visitors via Live View and Two-Way Talk. If you subscribe to Ring Protect you can also get intelligent alerts and the ability to scroll back in time to rewatch footage. Wi-Fi is single-band Wi-Fi 4 using the 2.4GHz frequency band.

One of the big selling points here is easy installation: it's simple to mount the camera and it's designed to cope with temperatures from -20ºC to +50ªC, although Ring says the camera may temporarily turn itself off if it's in direct sunlight during extreme heat conditions.

The Ring Outdoor Camera (2nd Gen) has a list price of £99.99 (about $130 / AU$190) and it'll be available from August 12, 2026. Pre-orders are open now.

Ring Peephole Camera 2K: this peep is fairly cheap and fits in doors that are quite deep

The new Ring Peephole Camera 2K is more stylish than its rather boxy predecessor, with a more triangular shape and a good-looking speckled finish. It fits through the space where you'd normally have an optical peephole, and there's no need to drill, run cables or do anything at all as it's completely wireless and runs off a rechargeable battery. It's designed to fit peepholes from 12mm to 14mm in size and go through doors between 32.5mm and 60mm.

I think this is going to be particularly popular with flat dwellers, especially renters who can't make any physical changes to the property: simply unscrew the optical peephole, install the camera, and you can take it with you when you move. Don't forget to keep the original peephole somewhere where you can find it again, though.

Like the new Outdoor Camera (2nd Gen) the resolution is 2K with up to 6x enhanced zoom, Live View and Two-Way Talk, but there's no night vision here so you'll need to make sure the door is facing a well-lit area. Ring says its camera is tuned for low-light conditions, but this camera doesn't see in the dark like the Outdoor Camera does.

The field of view is 140 x 140 degrees to deliver 'head-to-toe' visuals, and the quick release battery is easy to remove for charging. Wi-Fi is Wi-Fi 4 on the 2.4GHz frequency band.

The Ring Peephole Camera 2K will be available from August 19, 2026, and pre-orders are open now. The list price is £79.99 (about $110 / AU$150).

Computing is so ubiquitous that we often see more than one in most households, including laptops, desktops, all-in-ones, smartphones, tablets, and so on. But there was once a time when that certainly wasn't the case. In that context, some comments made by industry stalwarts of the past may appear like massive miscalculations.

Ethics in AI

The late Ken Olsen was the co-founder and CEO of Digital Equipment Corporation (DEC), a major company in the mid-20th century that produced a series of minicomputers over the decades in which it operated until its decline in 1998.

Despite being a key part of the computer industry, Olsen was adamant that the computer was something isolated to the enterprise — delivering his infamous comments in 1977 at a convention of the World Future Society. There are, however, two very important caveats.

Firstly, computers at the time were either gigantic mainframes or minicomputers that needed specialized staff to manage. Secondly, Olsen later claimed his words were taken completely out of context.

Smart living

Olsen claimed he wasn't referring to the sort of computers we see today in homes like desktop PCs or laptops, but actually the then-futuristic proposal of a master computer that would automate different functions around the house.

What the executive was referring to was what we now understand as the smart home. However, regardless of the context, his comments still missed the mark — as the rise of smart home technology has been a very exciting development during the 21st century.

That said, the vision of a fully automated and intelligent home has proven massively prohibitive, partially due to cost, partially due to hardware, and finally due to slow interoperability and integration. That latter element, however, is finally something that's been changing thanks to the Matter smart home standard.

Top PC accessories (for the computer you apparently don't need in your home)

Robot lawn mowers are growing in popularity, and with good reason. They're getting more advanced in features, easier to set up and use, and can be a huge time- and effort-saver... provided you pick the right model. There are plenty of options to choose from, spanning a range of prices and capabilities, and if you're new to the lawnbot world then it can be tricky to figure out which one you need.

This article is here to guide you through that process. I've pulled together five big questions to help you narrow down your options. And for added expertise, I've enlisted the help of KK Yin, Marketing Director at leading lawnbot brand Mammotion, whose insights you'll find throughout the piece.

#1. Do I need all-wheel drive?

"Everyone has a different environment for their lawn. So the first thing a customer should do is choose which kind of power system they need — for example, all-wheel drive or rear-wheel drive, or some the brands have front-wheel drive," says KK.

Rear-wheel drive will be perfectly fine if you have a relatively even and flat lawn, and will have no issue scaling relatively gentle inclines. However, if you have a very steep or uneven lawn, all-wheel drive (AWD) will help ensure the lawnbot maintains its grip without churning up your grass. Front-wheel drive is really only for flat lawns, and is a less common power system.

AWD tends to be reserved for larger, more premium robot mowers. However, at the start of this year Segway Navimow launched compact AWD model, with the suggestion that it would treat your turf more gently.

#2. Does my lawn have shaded areas?

Next, KK suggests figuring out which navigation method is best suited to the environment. "A customer should look at if they have shaded areas, the house is tall or they have trees in the garden. If they do, I suggest they don't choose an RTK positioning system. They should maybe choose a LiDAR model," says KK.

There are two major navigation systems for robot mowers. RTK, which uses satellites, can work very well if the lawnbot has a wide, uninterrupted view of the sky. However, if there are obstructions — such as those listed by KK — in the way, these can block the signal and lead to the lawnbot getting lost.

LiDAR is the system used by robot vacuums, and is relatively new in the robot mower market. LiDAR builds a picture of its surroundings by bouncing light off objects, so it's not well suited to wide-open lawns with no objects in them.

Broadly speaking, RTK will be a good choice in big, open yards, whereas LiDAR might be a better fit if you have a smaller, more cluttered yard. LiDAR models are often pricier, so if you can get away with an RTK bot, you might prefer to go with that option.

#3. How big is my lawn?

Many lawnbot models are available in a few different iterations aimed at different-sized lawns (typically indicated by a number after the product name). The difference is usually the battery capacity — a bot designed for a larger area will have a bigger battery, enabling it to cover more ground before having to return to its dock to recharge, thus making it more efficient.

"I think most users figure out that in one week they will mow maybe two or three times. So they need to work out how long it will take a product to mow their lawn once," suggests KK. With that information, you can work out if your mower will be efficient enough to keep up with your grass-trimming demands.

#4. Do I have more than one mowing zone?

"The next point, I think, is about multi-zone management," says KK. "Not all people have one big lawn — it's divided by the house, or the garden is split into different areas. That means they need to manage more than one mowing zone."

Pretty much every lawnbot will be able to mow multiple separate lawns, with the ability to create different maps in your app. However, some have more advanced multi-zone capabilities than others. One bot might be intelligent enough to handle a schedule where the lawnbot spends the morning in Zone A and moves to Zone B in the evening, and it might even be able to work out the optimal mowing patterns and cadence.

#5. How much setup do I want to do?

If you end up with a satellite-based lawnbot (see point #2), you might need to decide between a bot that comes with a separate antenna and one that does not. This RTK station is required to make the satellite information more accurate — so satellite positioning on its own might tell you where a bot is to within a meter or two, but add in a separate RTK receiver and it's more like centimeters.

Traditionally, you'd have this receiver in your own back yard. This adds an extra level of complexity to setup — the reciever needs to sit high up, with direct line of sight to satellites in the sky, and it also needs a power source. However, increasingly, we're seeing lawnbots that use a big, centralized RTK receiver that covers a large area. Mammotion calls this NetRTK. It's definitely a more low-effort option.

There are further features to look out for if you want the most straightforward setup. Some modern robot mowers have cameras and AI features that enable them to instantly create a map of their location, so you can just pop it on the floor and it'll be able to start mowing pretty much instantly. KK suggests these kinds of features are more of a nice-to-have, and advises focusing on the first four points first.

Reviews round-up

We've tested plenty of excellent lawnbots at TechRadar. Here's a taster of some of our favorites — tap the 'View details' button for more information, plus a link to our full reviews.

• Philips is rumored to be launching a new camera-based Hue Sync device for its TV backlights
• It removes the need for a pricey Hue Play HDMI Sync Box
• The 'Sync Screen' would be the first camera for the Philips Hue Play system

Philips Hue could be working on a new device for syncing your TV’s color palette to your backlights, giving you another option for illuminating your entertainment setup

Fabian of Hue Blog attended an online presentation hosted by Philips, and spotted a new Hue Sync device with an integrated camera that looks strikingly similar to rival devices like the Nanoleaf 4D.

The new gadget could be called ‘Sync Screen’, and may be unveiled at IFA 2026 in September. We don't know how much it will cost yet, but considering Philips Hue is a premium brand, it's likely the new device will sit in a higher price bracket than its competitors.

Just like other camera-operated TV LED lights, Philips’ version mounts to the top of a TV or monitor, and captures the color movements of the movie, show, or game on the screen. This movement is then processed and synced with backlights mounted behind the display.

From the image shared by Hue Blog, it seems that the Philips Sync Screen camera will only have one lens, but will likely be a fish-eye one to capture your entire TV screen — just like those used by rival devices.

You will almost certainly still need a Philips Hue Bridge to link the lights and camera to one another, but because the system camera-operated, you won't need a Philips Hue Play HDMI Sync Box or Hue Sync TV app subscription, which could make it a more tempting proposition.

As mentioned, Philips isn’t the first smart home giant to offer TV lighting gadgets like this, which aim to make your TV and gaming experiences more immersive by extending the colors from the screen onto the surrounding walls.

In addition to the Nanoleaf 4D light strips, the Govee StarPal Pro and the more recent Govee TV Backlight 3 Pro models are all camera-operated — the latter having a dual-camera system to capture more of your TV screen or monitor.

Philips has had quite an eventful 2026 already. In March the company unveiled its new OLED TVs, which are also the first native models for Dolby Vision 2, as well as its beautiful yet expensive ceiling light that mimics natural daylight. We’re just a mere two months away from IFA 2026, and I think the best is yet to come.

A new Google Home Display might be on the cards, but sticking to the traditional smart home hub format seems like a missed opportunity. What I really want to see this year is a new version of 2023's Google Pixel Tablet — and it would be a much better fit for a modern AI-powered smart home.

Google hasn't officially announced a new smart screen, but I think it's only a matter of time. Last year, Anish Kattukaran, Chief Product Officer for Google Home, said the company was still committed to the smart display format. "If you think about the properties of a smart display: a microphone, which means audio in, a speaker, so audio out. It’s got a screen, which complements a voice modality, you can interact with it and visualize information," he told The Vergecast.

"As I see where Gemini for Home is going and Gemini more broadly, all of the things Google is investing in building, for me it feels like almost the ultimate form factor to be able to deliver a really great home experience. So, that’s why we are going to continue to invest in that category, so I think it’s going to be awesome."

A smart home hub can be so much more than a speaker, screen, and microphone though, as the 2023 Google Pixel Tablet demonstrated — and I think a new version of that device would be an even better platform for Gemini than a Google Home Display.

The smart home untethered

If you're not familiar with the Pixel Tablet, it's essentially a full Android tablet specifically designed for use around the house. It doesn't have great battery life, and there's no SIM card slot for mobile data, but that's not a problem when you're never straying outside range of your home Wi-Fi network, or taking it far from its dock.

At first glance it looks just like a Google Home Display, but there's one big difference: while the Home Display is all one unit, the Pixel Tablet's screen lifts off its magnetic dock so you can carry it from room to room.

Unlike a Google Home Display, the Pixel Tablet isn't just a hub, either. Although it can be the heart of your smart home, providing quick access to your lights, switches, robovacs and cameras with quick voice controls, it's also a fully-featured Android tablet, with access to the whole Google Play Store. That means you can install your favorite web browser, stream movies from Netflix, or spend hours on YouTube on its 10.95-inch display. It has a reasonable front-facing camera as well, so it's ideal for Zoom calls with the family from the comfort of your sofa.

My Pixel Tablet lives on my kitchen table, where it serves as both a smart home hub and a second TV, letting me stream shows via BBC iPlayer at breakfast time, or use YouTube Music to play music while I work. The tablet's built-in speaker is quite tinny, but the one housed within its dock sounds surprisingly rich and well-balanced.

When it's time to make dinner, I can simply pluck it from its dock, stand it on the kitchen counter, and load my recipe app of choice, then in the evening, I can crash out on the sofa, adjust the lights, and finish my daily Duolingo session. You can't do that with a Home Display. Sounds good? It is — and it's now discontinued.

A smarter Pixel Tablet

So what would a 2026 Pixel Tablet look like? Well, apart from having Gemini pre-installed (naturally), it needs to function as a Thread border router, and its speaker needs a boost to bring it level with the new Google Home Speaker. Its 2,560 x 1,600px screen resolution is already respectable though (for comparison, the larger Amazon Echo Show 11's screen is 1,920 x 1,200px) and its weight doesn't matter considering it's not intended to travel outside the house, so I wouldn't worry about slimming it down much.

It would be nice to see a lower price, though. The original Pixel Tablet had a list price of $499 / £599 / AU$899, which is a hefty fee for a smart display. A cheaper Pixel Tablet might be wishful thinking, but considering you would need a Google Home Premium subscription to get the most out of Gemini, a lower asking price would make it a more tempting proposition.

There's a chance that Google might surprise me with a Google Home Tablet that can roam from room to room, but somehow I doubt it. Apple's vision for the future seems to involve multiple screens scattered throughout your home, while Amazon Echo devices are so affordable, it's easy to justify buying one for each room. We'll have to wait and see.

Eufy Omni S2: two-minute review

Eufy’s latest flagship robotic vacuum and mop, the Omni S2 is a hugely impressive appliance that combines excellent mopping with brilliant vacuuming to create one of the best home cleaning systems you can buy. It also self-cleans so thoroughly that, after several weeks of daily use, the dust bin, rollers and mop still looked like new.

The Omni S2 uses warm water to clean its spinning mop as it goes, while also scraping away dirt and using cyclone technology to whisk dust more efficiently into the onboard bin, instead of leaving it to clog up the filters. Water is ozonated in the base station to further improve cleaning performance, and there’s an integrated detergent system too.

The robot itself can even be fitted with a fragrance diffuser, which makes your room smell nice after every clean; three different scents are included in the box and, along with the detergent, and can be replenished from Eufy’s website.

It navigates well, mostly avoiding contact with walls and doors while driving very closely to all manner of obstacles without pushing them around, driving over them or ingesting them. The S2 is good at climbing over raised carpets, rugs and door thresholds — something the Omni S1 struggled with – and the app does a great job of quickly mapping your home, with a simple editing system for labeling every room correctly, and even adding virtual furniture.

I was impressed by how quiet the Omni S2 is, even with its powerful Cyclone mode engaged, and how the base station doesn’t sound like an Airbus when emptying the robot. It’s a very expensive product, but one that looks good and performs extremely well.

Eufy Omni S2: price and availability

• List price: $1,599 / £1,599 / AU$2,299
• Launched: March 2026

Just two years on from the launch of the Omni S1 Pro, Eufy now has the Omni S2. This is now the company’s flagship robotic vacuum and mop, with a price, performance and feature set to match.

It carries a recommended retail price of $1,599 / £1,599 / AU$2,299, making it £300 more expensive than the S1 pro, which remains on sale. That’s an awful lot of money for a vacuum cleaner — especially when

Eufy’s own range of robovacs starts under the £150 mark, and one of my favourites — the X10 Pro Omni vacuum and mop — is a comparative snip at £599.

What does the extra £1,000 get you with the S2? More power, of course, with greater suction thanks to Eufy’s new AeroTurbo 2.0 tech, improved intelligence, greater threshold clearance, a more powerful mop, better computer vision, a self-cleaning mop, electrolysed water, integrated detergent and even a built-in fragrance system with three included scents to pick from.

An additional cost to bear in mind is Eufy’s replacement parts kit. The brushes, bags, mops and rollers of all vacuum cleaners need replacing, so ongoing costs aren’t unusual, but Eufy likes to charge plenty. A complete kit for the S2 is £79.99. Premium parts for a premium robovac, I suppose. More welcome is Eufy’s new two-year warranty, which applies to all robot vacuums launched in 2026 and doubles the previous coverage.

• Value score: 3.5/5

Eufy Omni S2: specifications

Eufy Omni S2: design

• Docking station with charger, dust bag, water tanks and mop drying
• Rotating, self-cleaning mop
• Integrated detergent and fragrance supply

The S2 has a similar but more refined look than its S1 predecessor. The subtle bronze tint to sections of the robot and docking station give it a premium aesthetic that blends nicely with the futuristic lighting in both the clean water tank of the dock, and the robot’s onboard dust bin.

Taller than many docking stations, but significantly more elegant than most, the Omni S2’s appearance helps to justify its lofty price tag — and that’s further aided by the display and touch controls on top of the dock. These are handily located to press without stooping down to the robot itself, while the screen is useful for checking on the robot’s status and spotting error messages.

Short of making you a cup of tea while the robot cleans up, the S2’s docking station does absolutely everything. It charges the robot, empties its dust bin, replenishes its water supply (and even ozonates fresh water before it’s fed to the mop), cleans the mop with water heated to 70 degrees centigrade, dries it with hot air, refills the detergent tank, and has enough dust bin capacity for up to a claimed 68 days between bag replacements.

The robot itself is almost circular, with a central roller that’s claimed to be 100 percent tangle free, a pair of spinning side brushes, and a roller mop that self-cleans, slides outwards by 1.5cm to reach into corners and even an onboard fragrance supply to make your home smell nice. The S2 includes three different fragrances in the box, but these are a bespoke design so replacements can only be bought from Eufy itself. The same goes for the detergent bottle too, while thankfully the 2.5-litre dust bags are generic.

I like how the Omni S2 looks. Its design is more sophisticated than that of the S1, and I can imagine it neatly complementing the lavish houses of its deep-pocketed buyers. And while tall, at 670mm (26.4 inches), the docking station is relatively slim.

The robot is also relatively short, at 85mm. This compares favorably against taller, bulkier robovacs like the Dyson Spot+Scrub AI, which towers over the Eufy at 110mm and is less capable of cleaning beneath low furniture.

A welcome design upgrade for the Eufy Omni S2 is its ability to now clear door thresholds up to 4.2cm tall, up from just 2cm for the Omni S1. I was often left frustrated by that robot’s inability to drive up from exposed floorboards to a carpeted neighboring room, but have had no such issues with the S2.

• Design score: 5/5

Eufy Omni S2: performance

• Impressive vacuuming
• Excellent mopping
• Strong improvement over the S1

From the setup process and mapping, to vacuuming, mopping, navigation and self-cleaning, the Omni S2 is a triumph. You might say it should well be for the massive price tag, but even in 2026 it’s rare for such a complex new product to impress so universally. Where the Eufy Omni S1 struggled in some key areas — navigation, threshold clearance and sometimes even vacuuming — the S2’s performance is close to perfect.

Yes, it’s an ultra-premium product with a price to match. This is right up there with your Leica camera, Rimowa suitcase and five-figure turntable. I imagine the typical Omni S2 owner is the sort of person who wouldn't blink at splashing out on a pair of Apple AirPods Max 2 at the airport because they forgot their first-gens at home. They’d probably deal with a flight delay by picking up a new Swiss watch, too.

And that’s absolutely fine. Whatever the product, there’s always something that happens to sell the most expensive one, and for robotic vacuums that just so happens to be Eufy with the Omni S2. That doesn’t inherently count against it, because there are always customers happy to pay a premium for the one they like, or not really care about the cost because the S2’s spec sheet, design and feature set already put it at the top of the market.

What matters is how it performs in the real world, and how that compares to user expectations. Naturally, mine were at an all-time high and the S2 mostly delivered. The vacuuming performance is noticeably better than with the S1, and after a month of testing I still smile at the neat stripes vacuumed into my lounge carpet — and at how pleasant the S2’s fragrance system makes every room smell.

Eufy has improved navigation since the S1, and now the S2 is smart enough to not vacuum over the tasselled ends of a rug. It also automatically detects rug and carpet thickness, then raises itself by up to 50mm (1.97 inches) to prevent getting stuck in deep-pile fabric. In my testing, the S2 flagged a potentially tricky bit of carpet — which was actually an integrated but deeply contoured door mat — so I could tell it to ignore the concern or permanently avoid it.

Navigation and map creation is generally good. The robot only once got stuck and called for help, and I was impressed by how quickly the S2 mapped the ground floor of my home and did a decent job of detecting room boundaries. I used the app to fine-tune these, and was pleased to see how the S2 had added 3D cupboards, sofas, tables, chairs and other bits of furniture to the map. This isn’t strictly necessary, but it’s nice to see how the S2 correctly understands its environment.

Eufy claims a maximum suction of 30,000Pa, which is a huge upgrade over the 8,000Pa of the Omni S1 and other Eufy robots like the X10. There are four suction modes — Quiet, Standard, Turbo and Max — three options of cleaning intensity, three water levels, and the option of performing each cleaning task once or twice. As with the S1, the S2 returns to base whenever it needs to empty its bin, clean the mop, replenish its water supply or charge the battery. A mode called AI Automation promises to adjust cleaning strategy based on room type, floor material and cleaning frequency.

The Omni S2 deeply impressed during the first few weeks of general use, keeping hard floors and carpets clean — even after a cockapoo puppy joined our household, and his insistence on helping with garden projects brought a lot of dirt into the house. It was a joy, quite frankly, to have the S2 on hand, ready to clean up after every chaotic evening of dog zoomies.

I also loved how the S2 kept itself clean. Not only is the mop cleaned and dried with every use, but the cyclone-style dust collection ensures the onboard bin is practically spotless after each empty, and the filters don’t get clogged up. The rollers also looked like new after many hours of use, thanks to an anti-tangle design that actually works.

The mopping system works as well as the S1’s — evidenced by the absolutely filthy water collected in the waste tank of the docking station. I’d recommend owners empty this frequently, because if you wait a couple of weeks or so until it’s full, pouring it away is a seriously stinky process.

During TechRadar’s standardized robovac tests the Omni S2 continued to perform very well. These tests include two rounds of vacuuming on both carpets and hard floors, plus an obstacle avoidance test and a mopping test.

Pleasingly, the Omni S2’s vacuum performance is better than its predecessor, the two-year-old Omni S1. Vacuuming up oats from carpet was particularly impressive, with not a single piece being missed (except where I set the target zone in slightly the wrong place).

Before vacuuming

After vacuuming

During these tests I found the quickest, least powerful mode, called Quiet, was indeed very quiet (just 55 decibels on carpet), but the S2 performs best when suction is upped to the Standard or Turbo modes, cleaning intensity is increased from Fast to Standard, and the S2 is asked to perform two passes of the target zone or room, instead of one.

A crumb mix made of flour and crushed biscuit was completely lifted from a wooden kitchen floor using the S2’s standard intensity and suction settings, while on carpet I found Turbo or Cyclone (the most powerful suction mode) was best.

Crumb mix before first pass

Crumb mix after first pass

With that enabled, plus the intensity increased to Deep and the number of passes upped to two, the robot did a superb job.

Crumb mix after first pass

Crumb mix after second pass

The oat test is usually tougher, because robovacs tend to flick larger debris across hard floors with their spinning side brushes. The Omni S2 fell foul of this too, but as ever my advice is to set the robot to vacuum the entire room twice, instead of aiming for a target and kicking it everywhere.

With the right settings applied, the S2 picked up every single piece – and passed the same test with flying colors on carpet too, where flicking debris is less of an issue.

Before vacuuming

After vacuuming

I tested the mopping system with a dried smear of ketchup, which was promptly removed from the wooden floor. The cylindrical mop spins and pivots outwards to reach into the edges of the room, while the robot scrapes it clean and washes it while driving. The mop is then dried with hot air at the base station, which takes several hours but is very quiet.

Before mopping

After mopping

Meanwhile, the S2’s obstacle avoidance saw it drive neatly around a shoe, a sock and a USB cable strewn across the floor. I was impressed by how close it got to each, with moving or ingesting anything.

Overall, the Eufy Omni S2 performed brilliantly. I would recommend using Standard intensity and Standard suction with two passes most of the time, then up the suction to Turbo or Cyclone for a deeper clean. The latter hitting just 70 decibels was also impressive — for context, my Dyson V10 stick vacuum is 90 dB at medium power.

I only encountered one serious problem with the S2, and unfortunately it led to a replacement unit being provided by Eufy. The first S2 performed perfectly for a month, but developed a fault where the robot and docking station lost their connection. Several reboots and lots of advice from customer services failed to find a solution, so a second S2 was delivered and the original went back to Eufy for an inspection.

Naturally, this is disappointing for such an expensive product. But I was impressed by Eufy’s customer service department — which I approached as a customer and not a journalist — and how quickly the problem was resolved. The second unit performed perfectly throughout the rest of my test.

• Performance score: 4.5/5

Eufy Omni S2: app

• Easy to use
• Lots of configurability
• Also handles Eufy security products
• Option to charge at night — great if you have an EV tariff

The Eufy app gets better with every revision, and today it’s one of the best robovac apps I’ve ever used. Everything is logically laid out, with just the right amount of adjustability on offer to keep both newcomers and power users happy. The app is quick, responsive and presents everything in a way that’s easy to understand.

I especially like how it adds virtual furniture to your floor maps, which makes it easier to understand the layout and visualize where the robot is. Editing floor plans also works well, with simple tools for splitting, combining and renaming rooms after the robot has created an initial (but not always accurate) map of your home. Multiple floormaps can also be created, making it easy to save a second map for your bedrooms upstairs, for example.

Another feature I like is how pre-defined tasks can be created. I have one called “After dinner”, which tells the S2 to vacuum and mop my kitchen a certain way. A single tap of this from the Eufy app home screen, and the robot gets to work.

Since getting a puppy I’ve come to value Eufy’s child lock function, which disables the buttons on top of the robot – handy for both inquisitive children and dogs alike. I also like the off-peak charging function, where you can configure the S2 to only charge its battery at certain times of day. Since I have an electric car and an EV tariff, I’ve set the robovac to only charge at night, when my electricity is much cheaper.

• App score: 4.5/5

Should you buy the Eufy Omni S2?

Buy it if

Don't buy it if

How I tested the Eufy Omni S2

I lived with the Eufy Omni S2 for several weeks before writing this review. During that time it was used exclusively to vacuum the carpets and mop the floors of my house. I tested its cleaning abilities, tried some of the included fragrance diffusers, and noted how its self-cleaning systems fared after many hours of use.

I then carried out a number of specific tests to understand how well it cleans different types of debris from carpet and hard floors, how effective its mopping system is, how good it is at avoiding obstacles, and how loud it is.

First reviewed July 2026

Amazon Prime Day 2026 in Australia had a flurry of discounts across its product portfolio last week (and early this week too), and robot vacuums saw some of the biggest price reductions at the time, with deals of up to a whopping 78% off. That meant that some of the top sellers were, in fact, robovacs, with the Dreame X40 Ultra being the most popular appliance — so much so, it was out of stock by the last day of the sale.

So while that specific deal is no longer available (it was 73% off, by the way), there are still a lot of robovac deals still live on Amazon, including some of our top-rated models tested and reviewed by our international team of experts, with discounts of up to 70%.

Robot vacuum discounts aren’t new — the market is crowded with several major players looking to stand out and each one releases a new model every few months promising the best features possible at various price points. And that’s good news for the consumer as you’re guaranteed new technology at good prices. With everything else getting more expensive these days, a race-to-the-bottom price war like this is always welcome.

The best part is, even if you missed out on Prime Day, you don’t have to wait until Black Friday if you’re in the market for a new robot vacuum — these 6 deals below are still live and would make a fantastic addition to your home, no matter your budget.

• A software update bricked Philips Hue Bridge Pro devices
• The bug required a very specific set of circumstances
• Philips Hue has promised free replacements to affected users

Over the last few weeks, reports have emerged of Philips Hue Bridge Pro smart home devices becoming bricked, and it looks like the culprit has now been identified. According to Philips Hue, the fault lay with a recent software update — but the company has won plaudits for what it's giving to customers in order to make amends.

The trouble started in late June when Philips Hue released software update 2071353020, which was intended to include “several small changes” that improved the product’s operations. Yet reports started flooding in that the update had caused people’s Hue Bridge Pro devices to fail and become completely unresponsive.

In a statement to Ars Technica, Philips Hue explained the very specific circumstances that caused the problem: “The issue affects users who disabled automatic software updates, remained on an older software version for an extended period, and then manually installed a firmware update after the update package had been stored on the Bridge for more than 10 days.”

As well as that, the spokesperson noted that “Our data shows fewer than 100 Philips Hue Bridge Pro devices have been impacted.”

Still, any disruption like this is a pain. If you’re affected, not only will you have to wait for a replacement to arrive, but you’ll also have to reconfigure your lights and settings from scratch. That’s the kind of disturbance that is made all the more irritating due to the fact that it occurred after users updated their software — something that people are often encouraged to do in order to get the latest bug fixes and improvements.

Free replacements

While it’s always unpleasant to see a software update brick your device, Philips Hue has attracted praise for the way it’s responded. Not only has it issued a fix, but the company has promised that “We will replace affected Philips Hue Bridge Pro devices free of charge, regardless of warranty status.”

The decision has proved popular with Hue owners on Reddit, who've noted in one popular thread that it's a rare example of "big company actually making good". Another comment noted: “Considering the RAM prices too those Bridges went up in costs too. W to Philips on this one.”

If you haven’t updated your Philips Hue Bridge Pro for a while and think your device could be vulnerable according to Philips Hue's description, it might be worth getting in touch with the company first before attempting to update. The last thing you want is a bricked product on your hands.

And if you already have been affected, don’t spring for a replacement device just yet. You might be able to get a free replacement from Philips Hue, so be sure to explore that avenue first before spending a dime on anything new.

While the TechRadar Australia team has been knee-deep in covering this week's Amazon Prime Day sale, we were rocked by the news of my colleague, Max Langridge, recording a break-in attempt at his home with a Ring security camera. It was enough for him to bolster security further by picking up some extra Blink cameras while they're discounted.

One of the best things about modern home-security cams is that they're very cheap to purchase, with Ring cameras starting as low as AU$35 for the indoor camera (although the brand has some premium options, too) and Blink with even more affordable offerings from AU$31 for a 2-pack of the Mini 2K+.

But there’s a catch with these Amazon-made security cameras — you have to sign up for a monthly subscription to access some of their most useful features, like cloud video storage and movement detection . There are some workarounds with Blink cameras, such as the flash storage-supporting Sync Module 2, but on the whole, you need to pay extra to use the cameras to their full potential.

Fortunately, there are plenty of other compelling Prime Day deals on security cameras that don’t require a monthly subscription to access essential features.

I’ve pulled together five such subscription-free security camera discounts below, including offerings from reputable brands like TP-Link, Reolink, Wyze and more:

Amazon's Prime Day sale has delivered another very tempting robot vacuum deal, with the Dreame X50 Ultra dropping to just AU$1,479. That's a huge discount from its AU$2,999 launch price last year, and well below the usual AU$2,000 price we've seen it discounted to in recent months.

It isn't a budget buy, even at AU$1,479, but this is the lowest price we've seen for this robovac so far and, given it scored an impressive 4.5 stars in our Dreame X50 Ultra Complete review, we think it's worth considering at this price.

This isn't just another robot vacuum with a mop attached to the rear. The Dreame X50 Ultra is built to be a proper hands-off floor cleaner, with a self-emptying, self-refilling and self-cleaning dock, 20,000Pa suction, extendable mop pads and a side brush designed to reach into edges and corners.

In our review, the Dreame X50 Ultra was described as setting "a new standard" for the best robot vacuums, with the reviewer praising its cleaning results and low-maintenance design.

The model reviewed was the Complete version, which means it comes with an accessory bundle, but the core robovac and dock is the same X50 Ultra you'll find in this Amazon Prime Day deal.

The X50 has a lot of clever features that make it more capable than previous models. Its navigation puck can retract so the robovac can clean under lower furniture, while its small threshold-hopping legs help it clear raised room dividers and other tricky transitions around the home.

Our review also highlights its mopping and vacuuming performance — especially its ability to make use of its extending side brush and mop pads.

However, our reviewer found the X50 Ultra's object avoidance wasn't always as reliable as expected, and its pet-waste detection needed the right settings to work properly in testing. Despits these shortcomings, it still scored very well in our tests, which is saying something.

If you've been waiting for Dreame's top model to fall to a more tempting price, Prime Day has delivered exactly that.

More Amazon Prime Day deals in Australia

• All the best Amazon Prime Day 2026 deals
• Best Prime Day deals under AU$100
• Best Prime Day vacuum cleaner deals
• Best Prime Day headphone deals
• Best Prime Day Apple deals
• Best Prime Day Garmin deals
• Best Prime Day coffee machine deals

You might also like...

• The best robot vacuums we've tested

• The Google Home Speaker supports wireless connectivity to the Google TV Streamer
• This gives a simple way to curate your own home theater setup
• You can connect your Google Home Speaker through your Google TV device, or via the Google Home app

Google’s new Home Speaker comes with a slew of much-needed upgrades, but its support for wireless connectivity with the Google TV Streamer is a tool users have been pining for since the company started making smart hubs.

As well as its Gemini-powered smarts and 360-degree audio redesign, Google now lets you to wirelessly pair the Home Speaker with your Google TV device, allowing you to ditch your TV’s built-in speakers and set up a home theater system. Pairing just one Google Home Speaker works, but you’ll get the most out of your setup if you have two.

The company announced its initial plans to develop the feature in 2020 when it unveiled the Nest Audio, its first smart speaker, but the functionality never arrived. “Google Home Speaker now works together with your Google TV Streamer. You can pair up to two speakers with a Google TV Streamer to turn your living room into a mini home theater with spatial surround sound,” the company detailed in a blog post.

Surround-sound systems are integral to most entertainment fanatic’s setups, but they don’t always have to feature a multitude of different types of speakers — some people simply rely on the best sound bars to boost their audio. Though the Google Home Speaker isn’t necessarily suited to seasoned audiophiles, it gives novices an inexpensive and hassle-free way to enhance their streaming experience.

It hasn’t been impossible to hook up wireless speakers to the Google TV Streamer, however, as the option to use the best Bluetooth speakers has always been there. However, because the Google Home Speaker’s function relies on Wi-Fi, the bandwidth is much bigger. This means it also supports Dolby Atmos which, for a cost-effective home theater setup, is quite a fair perk.

Audio champions such as Sonos and Bose have offered wireless connectivity with third-party streaming devices for years, so the Google Home Speaker’s functionality is far from new. That said, it’s only recently that TV manufacturers have decided to jump on the bandwagon and sell speakers of their own.

Over the last 18 months or so, brands including Amazon, LG and Samsung have released their own speakers to allow wireless connectivity with their range of TVs — so Google is playing catch-up here.

How to pair your Google Home Speaker with your Google TV Streamer

Once you’ve set up your Google Home Speaker for regular use, you can pair it with your Google TV device right from the home screen.

Using your Google TV Streamer remote, click the home button and head to ‘Quick Settings’ at the top of the screen. From there, select ‘Audio output’ from the options, click ‘Connect another device’, then select ‘Google speakers’ and click ‘Getting started’.

After this stage, you should see a list of Google Home Speakers connected to your account in a separate window, and you’ll want to select the ones you wish to pair with your Google TV Streamer. Once you’ve done this, tap ‘Next’ and it should complete your setup.

You can also do this from the Google Home app, as Google details on its support page.

Smart home security cameras are nothing new. They’ve been protecting Australian homes for well over a decade now, but for a long time I never felt the need for them. This was predominantly because for the majority of my adult life living away from home, I’ve been in rented accommodation, and so I’ve either been unable to install anything of my own, or I’ve been on an upper floor of an apartment building.

I’m now living in a ground floor apartment with my partner, and we’re the owners. That means we’re free to install cameras as we see fit, and so we decided to place an old Ring Outdoor Stick-Up Cam above our front door, mainly as a ‘just in case’ safeguard.

I’m now glad we did, and I’ve just invested in some newer Blink Outdoor 2K+ cameras with clearer vision following an attempted break in. The good news is they weren’t expensive, with a 2-pack currently costing AU$77 in the Amazon Prime Day sales.

I never thought my home would experience an attempted break in, and there’s a chance you’ve had the same thought. For such a low price right now, it’s better to be safe than sorry.

• Follow our live coverage of the best Prime Day 2026 deals, many of which ship to New Zealand as well

So, why have I made the impulsive decision to invest more heavily in home security? Well, my partner noticed the street-facing gate to our courtyard left ajar in the early hours of the morning. He suspected I just hadn’t closed it properly when we came home the night before.

Wanting to exonerate myself, we checked back over the footage taken by our Ring camera, which proved my innocence. We noticed more events were recorded around 1am, and sure enough, the Ring captured two youths climbing over the wall in the wee hours of the morning.

To say we were gobsmacked would be an understatement.

Fortunately nothing was stolen and they didn’t manage to get into our home — despite some clear hand prints on the glass door proving they peered in to see if there was anything worth nabbing.

Unfortunately, the Ring camera missed the activity by our door because it was only covering the front yard and fence area. I therefore now want to install more cameras in our outdoor area to ensure there are no blind spots, and the Blink cameras seem perfect for the job.

Our Blink Outdoor Cam 2K+ review found that recorded footage is clear and sharp, even at night. Perhaps the biggest selling point for me is the two-year battery life with two AA batteries. The Ring camera I have right now relies on a rechargeable battery that needs to be recharged frequently.

The biggest drawback, however, is a new Sync Module Core that requires a paid subscription to store and view back footage. It’s crazy that you need to pay to use the camera you just bought, but hey, it’s 2026. A subscription costs from AU$4.95p/m for one device, or AU$15p/m for unlimited devices. Since I’ve bought two Blink cameras, I’ll need the latter.

Fortunately, the older Sync Module 2 is still available and is compatible with the newer Blink cameras. With this module, you can attach a USB flash drive to store footage on, bypassing the need for a subscription. Based on the AU$15 Blink Plus subscription, I’d make my money back in just under four months.

However, the subscription does also open up extra features, including AI motion detection — you’ll receive notifications only when it detects specific things such as animals or vehicles.

At just AU$77 in the current Prime Day sales, I was more than happy to add the Blink Outdoor Cam 2K+ to my basket. There are many other options to choose from of course, many of which are also on sale right now. I’ve listed a few below, and be sure to check out our guide to the best home security cameras and best video doorbells for total home protection.

• Ring Floodlight Camera Pro (2nd Gen): was AU$449 now AU$329
• Ring Spotlight Camera Pro (2nd Gen): was AU$399 now AU$279
• Blink Outdoor Floodlight Camera Kit: was AU$119 now AU$49

EZVIZ EP4: one-minute review

Fitting a video doorbell or security camera is often a non-starter if you rent or live in an apartment where drilling into the walls isn’t allowed. That’s where the EZVIZ EP4 Wire-Free Peephole Door Viewer comes in — by fitting through your front door’s existing peephole, it brings almost everything you’d get from a full video doorbell, without any damage that could upset your landlord.

The physical setup is incredibly easy and took me just 10 minutes to complete. After you’ve unscrewed the old peephole, the EP4 securely clamps onto the door without a power tool in sight.

Once it’s running, the footage captured is very clear, giving you a detailed look at anyone outside. The companion app is simple to use and intuitively designed, making it effortless to check live feeds, use the two-way talk feature, or adjust security settings.

When it comes to saving video footage, EZVIZ doesn’t lock you into a subscription plan like some rivals. While the company includes a free trial of its cloud subscription service, you aren’t forced to pay for it afterwards. If you want to skip the recurring fees, you can opt to install a local microSD card (up to 512GB) to store clips locally.

However, the EP4’s AI facial recognition has a notable quirk. Although it's smart enough to identify who is at your door, there’s currently no way to stop the app from sending you notifications when it spots someone you know — including you. Because you can’t tell the camera to ignore certain individuals, you’ll be alerted every time you walk through your own front door.

EZVIZ EP4: price and availability

• List price £229.99 (about $300 / AU$440)
• Available in the UK, but not the US or Australia
• No subscription necessary if you use a microSD card

The EZVIZ EP4 Wire-Free Peephole Door Viewer is available in the UK for £229.99 (about $300 / AU$440), but I’ve seen it discounted to as little as £159.99 during sales events. It’s not yet available in the US and Australia at the time of writing, but older models are, so hopefully the EP4 will launch more widely soon.

If you want to store your videos at home subscription-free, you’ll also need a microSD card (up to 512GB), so factor this into the cost. If you’d prefer to store footage in the cloud, you’ll want an EZVIZ CloudPlay subscription. After a 30-day free trial, there are three plans to choose from: